[M3 Driver]

planning to buy a set of coilovers; the brand is yet to be determined (TCK or ST). looking for suggestions as to the preferred DFW area installer. i am located in far north Dallas but open to the metroplex for the best service. also any advice on what the typical cost for install is.

[ONALL4S]

Try Texas Track Works. It is a bit of a haul, but they do great work.

[tripleblackrag]

Originally Posted by M3 Driver

planning to buy a set of coilovers; the brand is yet to be determined (TCK or ST). looking for suggestions as to the preferred DFW area installer. i am located in far north Dallas but open to the metroplex for the best service. also any advice on what the typical cost for install is.

Clown Shoe Motorsports does all the work that I don't feel like tackling... They can do anything you want to an M there (engines, suspension, cages blah blah). They have done my SMG clutch and lightweight flywheel, header install and today they finished up doing all race bushings, subframe reinforcement and adjustable control arms.

I will be having them build a lower compression S54 motor for me as well.

Talk to Jeff or BJ and tell them Jamie referred you.

2605 Andjon Dr, Dallas, TX 75220
Phone: 214.774.2100 | Fax: 214.432.0658
Email: sales@clownshoemotorsports.com

[MPOWERD]

Originally Posted by tripleblackrag

Clown Shoe Motorsports does all the work that I don't feel like tackling... They can do anything you want to an M there (engines, suspension, cages blah blah). They have done my SMG clutch and lightweight flywheel, header install and today they finished up doing all race bushings, subframe reinforcement and adjustable control arms.

I will be having them build a lower compression S54 motor for me as well.

Talk to Jeff or BJ and tell them Jamie referred you.

2605 Andjon Dr, Dallas, TX 75220
Phone: 214.774.2100 | Fax: 214.432.0658
Email: sales@clownshoemotorsports.com

Absolutely! Clownshoe does fantastic work... Both Jeff and BJ are members of the forum as well and they have been working on my M for the last several years and have done superb work... A+

[tripleblackrag]

Originally Posted by MPOWERD

Absolutely! Clownshoe does fantastic work... Both Jeff and BJ are members of the forum as well and they have been working on my M for the last several years and have done superb work... A+

MPOWERD knows what's up. Just check out his post count or itrader.. He told me about Clown Shoe and I couldn't be happier with the service.

[tripleblackrag]

Originally Posted by MPOWERD

Absolutely! Clownshoe does fantastic work... Both Jeff and BJ are members of the forum as well and they have been working on my M for the last several years and have done superb work... A+

Let's not forget about Johnathon. He has spent hours and hours under my car at Clown Shoe. MPOWERD - are you going to sign up for an HPDE in the area? I want BJ to be my instructor as my car is ready to take a beating on the track.

[spankypokie]

thanks for the kind words guys!

OP, if you need help let us know. Best method is to call the shop to discuss brands and options. Or if you have time, swing by in the afternoons and meet us in person.

[deeznutz972]

Good info here, thx.

[Kalahari]

I've been to TTW and was quite impressed. I've also heard great things about Clownshoe. Go to whichever is closer.