Shop near NE PA to weld subframe reinforcements

30stones · Mon, Jul-09-2012, 01:33:00 AM

Hello all, checked the subframe for cracks today and unfortunately i found a small one, so I'm looking for a shop to weld in reinforcements.

I'm considering doing it myself, however if I can find a shop that's somewhat close and somewhat reasonable, I may have them do it. I wouldn't mind traveling a little ways for a good shop, though.

I live in Dallas, PA pretty much between Wilkes-Barre and Scranton.

Any suggestions would be greatly appreciated.

terraphantm · Wed, Jul-11-2012, 01:54:12 AM

Honestly, there's no one in this damn valley that I trust. They all manage to screw up even the simplest of jobs.

If I had to, I'd probably make a trip down to VAC.

nofronts · Wed, Jul-11-2012, 02:37:05 PM

VAC is a good bet but i would consider based on your location to go to TKX performance in long island. I went to TKX and i live 15 blocks away from VAC only because VAC wanted more the double what TKX charges.

mills84 · Wed, Jul-11-2012, 03:10:29 PM

Quote:

Originally Posted by terraphantm

Honestly, there's no one in this damn valley that I trust. They all manage to screw up even the simplest of jobs.

If I had to, I'd probably make a trip down to VAC.

This. Call TKX and VAC and see who will do the job cheaper.

30stones · Thu, Jul-12-2012, 11:48:13 PM

Thanks for all the replies. Doesn't it suck to have to drive 2 hrs to get decent work done...
I was thinking Max PSI in North Jersey, anyone have experience with them?

mills84 · Fri, Jul-13-2012, 02:58:17 AM

Quote:

Originally Posted by 30stones

Thanks for all the replies. Doesn't it suck to have to drive 2 hrs to get decent work done...
I was thinking Max PSI in North Jersey, anyone have experience with them?

Yes, that's one thing that sucked about living in the valley... That's why I used to do work on the side for people when I lived there.

dmg · Mon, Aug-13-2012, 05:46:47 PM

moonlite autowerks does them, they're near Boyertown Pa

Mon, Jul-09-2012, 01:33:00 AM	#1
30stones Registered User Join Date: Feb 2007 Posts: 89 In the garage: '04 BMW M3 Reputation: 0 Location: Dallas, PA	Shop near NE PA to weld subframe reinforcements Hello all, checked the subframe for cracks today and unfortunately i found a small one, so I'm looking for a shop to weld in reinforcements. I'm considering doing it myself, however if I can find a shop that's somewhat close and somewhat reasonable, I may have them do it. I wouldn't mind traveling a little ways for a good shop, though. I live in Dallas, PA pretty much between Wilkes-Barre and Scranton. Any suggestions would be greatly appreciated. __________________ 04 M3 CB/Cinn

Wed, Jul-11-2012, 01:54:12 AM	#2
terraphantm Registered User Join Date: Dec 2010 Posts: 2,241 In the garage: '05 BMW M3 Reputation: 0 Location: Here and there	Re: Shop near NE PA to weld subframe reinforcements Honestly, there's no one in this damn valley that I trust. They all manage to screw up even the simplest of jobs. If I had to, I'd probably make a trip down to VAC. __________________

Wed, Jul-11-2012, 02:37:05 PM	#3
nofronts Registered User Join Date: Dec 2008 Posts: 474 Reputation: 0 Location: Philadelphia	Re: Shop near NE PA to weld subframe reinforcements VAC is a good bet but i would consider based on your location to go to TKX performance in long island. I went to TKX and i live 15 blocks away from VAC only because VAC wanted more the double what TKX charges. __________________ 04 SMG Imola Red \| Black Cloth / Leather Interior \| Koni Yellow's \| Rouge RSM \| Power Flex RTAB \| JVT Headers \| Custom Performance CRT 400 Section 1 \| Turner Sub Frame Reinforcement \| Smoke Corners \| Kidney's & Gills Matte Black \| Angel Eyes \| CSL Diffuser \| CSL Boot Lid

Thu, Jul-12-2012, 11:48:13 PM	#5
30stones Registered User Join Date: Feb 2007 Posts: 89 In the garage: '04 BMW M3 Reputation: 0 Location: Dallas, PA	Re: Shop near NE PA to weld subframe reinforcements Thanks for all the replies. Doesn't it suck to have to drive 2 hrs to get decent work done... I was thinking Max PSI in North Jersey, anyone have experience with them? __________________ 04 M3 CB/Cinn

Mon, Aug-13-2012, 05:46:47 PM	#7
dmg Registered User Join Date: Feb 2005 Posts: 295 Reputation: 0	Re: Shop near NE PA to weld subframe reinforcements moonlite autowerks does them, they're near Boyertown Pa

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode