[mauromj]

Very cool. I just purchased everything to do this.

However, I went with this tray: https://www.ebay.com/itm/BMW-E36-E30...Bagsen&vxp=mtr

Its a little bit different (thinner aluminum sheet and chopped corners), but I am still thinking it will look good with the OEM struts.

[Braymond141]

Originally Posted by mauromj

Very cool. I just purchased everything to do this.

However, I went with this tray: https://www.ebay.com/itm/BMW-E36-E30...Bagsen&vxp=mtr

Its a little bit different (thinner aluminum sheet and chopped corners), but I am still thinking it will look good with the OEM struts.

It should actually work better since that one is based off the 318is/4 tray which these are originally for. Hopefully it will have enough extension.

[ANT'S M3]

Nice write up and looks good brett

[M3AN]

This is really helpful actually, thank you.

Does anybody have a length measurement for the brackets that drop from the chassis rails to the underpanel? I wanted to buy a MM kit but they don't reply to emails so I need to make my own.

TIA.

[JitteryJoe]

Originally Posted by M3AN

This is really helpful actually, thank you.

Does anybody have a length measurement for the brackets that drop from the chassis rails to the underpanel? I wanted to buy a MM kit but they don't reply to emails so I need to make my own.

TIA.

I measure 7 3/8 forward edge, 6 7/8 rear edge. I ordered one recently and received no problem.


Sent from my iPhone using Tapatalk

[tripitz]

Originally Posted by M3AN

This is really helpful actually, thank you.

Does anybody have a length measurement for the brackets that drop from the chassis rails to the underpanel? I wanted to buy a MM kit but they don't reply to emails so I need to make my own.

TIA.

What other splitter is recommended? I refuse to give them any more of my money. I know Braymond's stanchion kit specifically mentions the MM splitter.

[Braymond141]

I can make another underpanel option if you guys want to commit to a group buy.

[M3AN]

Originally Posted by JitteryJoe

I measure 7 3/8 forward edge, 6 7/8 rear edge. I ordered one recently and received no problem.

Thank you.

Originally Posted by tripitz

What other splitter is recommended?

Splitters I'm not sure sorry, I'm just looking at an underpanel at the momoent.

Originally Posted by Braymond141

I can make another underpanel option if you guys want to commit to a group buy.

Depending on price I'd be able to commit to two or three, let us now what you're thinking.

[Braymond141]

Originally Posted by M3AN

Depending on price I'd be able to commit to two or three, let us now what you're thinking.

I need at least 10 people to step up and be guaranteed. I already made parts I thought were hella cool, spent A LOT of money, and only sold a couple. Not doing that again.

[M3AN]

Originally Posted by Braymond141

I need at least 10 people to step up and be guaranteed. I already made parts I thought were hella cool, spent A LOT of money, and only sold a couple. Not doing that again.

Fair enough, seems perfectly reasonable to me.

I'll send you a PM a bit later to see how we could move this forward and get a 10+ commitment.