![]() |
|
Loading
|
Mobile M3forum |
|
|
||||||
|
|
|||||||
| E46 M3 (2001-2006) Engine: S54 - Max Hp: 333 hp at 7,900 rpm / 262 lb/ft at 4,900 rpm Total Produced: 45,000+ - Years Produced: 2001 to 2006. |
|
|
|
Thread Tools | Display Modes |
|
|
#1 |
|
Registered User
Join Date: Nov 2009
Posts: 135
Reputation: 0
![]() Location: Cinainnai
![]() |
I have my angel eyes hooked up to be on when the car is running and with my interior lights, but there are times when I’d like to turn them off.
I don’t like adding switches to my cars that don’t look factory. I have an extra slot in my center console so I was thinking I would just buy a second HK speaker switch or another switch in that group and wire it to activate the AEs. I figure the HK switch would be a good one to use as it keeps memory with the car off. I have a few questions for you guys. I can’t find the switch on real OEM anyone have a link of a part number? Second any idea on wiring? I hope I can find a wiring harness as well or at least the correct connector so I can hook it up. And last if the key is off and the door is open will the switch still allow the lights to work?
__________________
2004 TiAg 6MT 20% Tint, RE Rtabs, updated Diff bolts, Aux input, 2 10" BSW subs, Clutch Stop, CDV Delete, TiAg Interior Trim, painted bumper reflectors, 6000k headlight, Fog lights(HID) and Angel Eyes, Clear corners and Macht Schnell Elbow and Filter. |
|
|
| Sponsored Links |
|
|
#2 |
|
Registered User
Join Date: Jan 2006
Posts: 15,031
Reputation: 0
![]() ![]() |
That panel of switches is all one piece, so you're not going to be able to order an individual switch. The button panels come up every now and again in the classifieds and on ebay. You'd need to buy one with the extra switch already on it and do some surgery.
|
|
|
|
|
#3 |
|
Registered User
Join Date: Nov 2009
Posts: 135
Reputation: 0
![]() Location: Cinainnai
![]() |
Damn i didn't know that and i've been in there (my aux input is mounted in the open slot now) i may need to think of something else.
__________________
2004 TiAg 6MT 20% Tint, RE Rtabs, updated Diff bolts, Aux input, 2 10" BSW subs, Clutch Stop, CDV Delete, TiAg Interior Trim, painted bumper reflectors, 6000k headlight, Fog lights(HID) and Angel Eyes, Clear corners and Macht Schnell Elbow and Filter. |
|
|
|
|
#4 |
|
Registered User
Join Date: Jan 2006
Posts: 15,031
Reputation: 0
![]() ![]() |
If you've already installed an aux input into the panel I think you would have noticed this? What year is your M3? I know the 3-series had individual buttons at one point but I thought the M3 always used the one-piece button panel with a single electrical connector in the back.
|
|
|
|
|
#5 | |
|
Registered User
Join Date: Nov 2009
Posts: 135
Reputation: 0
![]() Location: Cinainnai
![]() |
Quote:
Maybe I’ll put an aftermarket switch in the back of my sunglass tray where I can’t see it lol
__________________
2004 TiAg 6MT 20% Tint, RE Rtabs, updated Diff bolts, Aux input, 2 10" BSW subs, Clutch Stop, CDV Delete, TiAg Interior Trim, painted bumper reflectors, 6000k headlight, Fog lights(HID) and Angel Eyes, Clear corners and Macht Schnell Elbow and Filter. |
|
|
|
|
|
#6 |
|
Motorsport
Join Date: Dec 2008
Age: 25
Posts: 2,537
In the garage:
Reputation: 0
![]() Location: Sterling Heights
![]() |
Could also add a switch in the cupholder area/coin area.
|
|
|
|
|
#7 |
|
Registered User
Join Date: Jun 2012
Posts: 1
Reputation: 0
![]() ![]() |
Another idea - Convertibles have an extra window switch on the driver's side of the shift knob which operates all 4 windows simultaneously. You could use a convertible shift surround piece if you could figure out how to put a switch in that location that would do the trick. I imagine re-working a window switch to operate the lights would be a bit involved, but its just an idea....
GL |
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|