View Single Post
Old Mon, Jan-22-2018, 08:54:18 PM   #1
nholmes
Track Junky
 
nholmes's Avatar
 
Join Date: Aug 2016
Posts: 1,110
In the garage:
Reputation: 0 nholmes is on a distinguished road
Location: Bay Area

United States




Question ABS Pump Bleeder Nipple?

So, I'm looking into trying to get all the air out of my brake system and I believe that I have air trapped in the ABS module.

Before anyone asks, I've already bled 1L of fluid through the system using the 2 person method including cycling the ABS intake/exhaust solenoids with the pump via INPA. My next step will probably be to use ISTA-D / Rheingold and try the ABS bleed sequence included with that dealership software.

While I'm waiting to get that set-up, I wanted to see if anyone on the forums has ever had any success attaching a line to the nipple on the pump and then bleeding from there with the pump actuating.

It's almost impossible to access this nipple with the M/C, reservoir and the fuse box in the way, but I'm sure someone has tried this at least once?

I'm talking about this:



Usually it has a rubber cap on it like a brake caliper bleeder:



__________________
Follow my build thread here:

Quote:
Originally Posted by Nate047 View Post
Are you feeling loose in the rear end currently?
Jump to top nholmes is offline   Reply With Quote
Sponsored Links
Register now and remove these ads