View Single Post
Old Sun, Jun-12-2016, 01:51:54 AM   #63
Registered User
peter*g's Avatar
Join Date: Nov 2008
Posts: 93
In the garage:
Reputation: 0 peter*g is on a distinguished road

United States

Default Re: Building an E30 M3 gravel rally car :-)

Lots of fabrication work has completed over the past two weeks by the folks over at TC Design Motorsports. Check out the detailed pictures below:

The floor of the car stripped and prepped for the cage. Note the hole in the firewall that's the last remnant of the crash damage that needed to be repaired. You can also see the seam welding around the chassis.

Here is the firewall repaired:

The front suspension has been reinforced to handle the stress of rough roads and big jumps:

And here is the rest of the cage:

Lastly, a lot of work has been done to seal up as many of the holes in the chassis as possible, including the sunroof.

There's still lots more fabrication work, and the driveline was fitted to address any issues with clearances:


- peter*g

.'02 E46 M3 (GTS roadracer)
.'96 E36 M3 (Dinan S3)
.'90 E30 M3 (rally racer)
Jump to top peter*g is offline   Reply With Quote