View Single Post
Old Tue, Feb-14-2006, 01:50:32 AM   #36
///M Life
vRooooM's Avatar
Join Date: Mar 2004
Posts: 519
Reputation: 0 vRooooM is a glorious beacon of lightvRooooM is a glorious beacon of light
Location: Rochester Hills



I just wanted to clarify that at step No. 14, once the knob wires are connected to the 12 way connector. The 12 way connector has to be connected to its original location before turning the key to position No. 2 and running the gear test to see if the lights are working. I had assumed that everyone will know to do this, but just wanted to clear it up.

14. Once the wires are in its correct location. Turn the ignition to position No. 2, apply parking brakes, and cycle through R, N. and D/S. Knob should light up as gears are selected. If the test is successful move on to next step; otherwise check your connection.

04 SG/IR
SMG, Prem. pkg -Assist, NAV, adj. width, xenon, univeral transceiver, HK
M5/M6 SMG Shift knob, Royal F1 paddles, Streamline P/F, IceLink Plus, RG4v2, D/A software, TCKline D/A, V-CSL Trunk/Diffuser, RPI Scoop
07 S60 R
Jump to top vRooooM is offline   Reply With Quote