View Single Post
Old Fri, Jul-13-2018, 12:50:01 AM   #30
ApexRaceParts
M3Forum Sponsor
 
Join Date: Jun 2012
Posts: 1,518
Reputation: 0 ApexRaceParts is on a distinguished road

United States




Default Re: ► APEX | FL-5 Lightweight Track Wheels

Quote:
Originally Posted by Coinage View Post
@apex do you have anything that would fit the e60 XI chassis in 18x9.5 high ET all around (265/35 tires) running e60 m5 brakes on all four corners?
Coinage,

That is a great question! While we have not tested this fitment in-house, we have seen a few E60 owners run our 18x9.5 ET22 all around with a 10mm or 12mm spacer and the front strut pins pulled for added negative camber up front. This should aid in fender side clearance.

We cannot guarantee that this will work for your application but we have seen this done.

We would also recommend the 18x8.5 ET35 as a square fitment with spacers front and rear to aid in suspension clearance. This would only be able to house a 245/40-18 tire however.

Unfortunately, we do not have any higher offset fitments for the E60 xi owner at this time, if you are not looking to run a spacer.

I hope this information was helpful. If you have any further questions, feel free to reach out to us via PM!

-Max
Jump to top ApexRaceParts is online now   Reply With Quote