BMW M3 Forum
BMW M3 Forum BMW M3 Gallery BMW M3 Reviews BMW M3 Social Groups BMW M3 Chat M3Forum Sponsors >>
Loading


Mobile M3forum
Go Back   BMW M3 Forum.com (E30 M3 | E36 M3 | E46 M3 | E92 M3 | F80/X) > Search Forums
Tire Rack Buy Winter Tires Now!
Not a member? Register Now!
Register Gallery All Albums Garage Search Today's Posts Mark Forums Read Calendar FAQ


Showing results 1 to 100 of 304
Search took 0.02 seconds.
Search: Posts Made By: iride113
Forum: E46 M3 (2001-2006) Wed, Oct-18-2017, 07:57:01 PM
Replies: 1
Views: 240
Posted By iride113
Center Console will unlock/lock doors but key will not

Yesterday I came out of class to my key not being able to unlock the doors. I had to climb through the trunk to unlock the doors. Upon taking the car home I noticed at my second key would also not...
Forum: E46 M3 (2001-2006) Sun, Jul-16-2017, 09:50:11 AM
Replies: 19
Views: 808
Posted By iride113
Re: Help Tracking Down a Front End Vibration

Update: New tires all around, plus a full alignment by a very good shop. No bends in any wheels and every wheel balances perfectly with tires both on and off. Vibration is still there and more...
Forum: E46 M3 (2001-2006) Sun, Jul-16-2017, 09:48:55 AM
Replies: 19
Views: 808
Posted By iride113
Forum: E46 M3 (2001-2006) Sat, Jul-08-2017, 01:57:45 AM
Replies: 19
Views: 808
Posted By iride113
Re: Help Tracking Down a Front End Vibration

Bushings have been replaced... not so sure arms need to be done. They aren't bent... hats would cause full car vibration I would think, right?
Forum: E46 M3 (2001-2006) Sat, Jul-08-2017, 12:59:00 AM
Replies: 19
Views: 808
Posted By iride113
Re: Help Tracking Down a Front End Vibration

Yes, torque to 90 ft-lbs, star pattern. Have tried different lugs and wheels.
Forum: E46 M3 (2001-2006) Fri, Jul-07-2017, 11:58:00 PM
Replies: 19
Views: 808
Posted By iride113
Re: Help Tracking Down a Front End Vibration

Update: replaced both steering rack and wheel bearings... steering wheel shake is still there. Anyone have any other ideas? I'm stumped and irritated.
Forum: Parts for Sale/Wanted Thu, Jul-06-2017, 09:32:24 PM
Replies: 1
Views: 447
Posted By iride113
Forum: Parts for Sale/Wanted Fri, Jun-30-2017, 12:43:23 AM
Replies: 1
Views: 447
Posted By iride113
FS: E46 M3 Ground Control Sway Bar Set

I bought these off another forum member about 3 months ago. They were installed and driven on for about 500 miles. I am selling them as I return the car to stock before I sell it.

Compared to HR,...
Forum: E46 M3 (2001-2006) Wed, May-31-2017, 08:42:51 PM
Replies: 19
Views: 808
Posted By iride113
Re: Help Tracking Down a Front End Vibration

I appreciate all the help, however I believe the issue is the rack itself. I have definitly beaten on the rack since owning the car sliding it thru turns, so it's a fair guess at this point. There is...
Forum: E46 M3 (2001-2006) Sun, May-21-2017, 08:16:13 PM
Replies: 19
Views: 808
Posted By iride113
Re: Help Tracking Down a Front End Vibration

No I have not yet.



Yes go to Southwest Bimmers if you are here Monday. Ask for Shane if you go. He will take care of you. Tell him Tony sent you. I'll get ball joints and tie rods checked...
Forum: E46 M3 (2001-2006) Sun, May-21-2017, 01:05:19 AM
Replies: 19
Views: 808
Posted By iride113
Help Tracking Down a Front End Vibration

I don't usually post on the forums anymore because everything has been so smooth with since owning my M3, but for the last 1,000 miles I've had a front end vibration that starts at 80 mph and...
Forum: Parts for Sale/Wanted Sun, Apr-23-2017, 08:26:20 AM
Replies: 14
Views: 2,544
Posted By iride113
Forum: Parts for Sale/Wanted Sun, Apr-09-2017, 08:21:04 PM
Replies: 137
Views: 22,932
Posted By iride113
Re: New E46 Angel Eyes

Would love a set of white/amber switchable to 89139.
Forum: Parts for Sale/Wanted Sun, Apr-09-2017, 08:18:25 PM
Replies: 15
Views: 2,095
Posted By iride113
Re: Maxspeed Motorsports GT3 CGT Style Seats

In 4 pictures. Can pickup asap
Forum: E46 M3 (2001-2006) Sun, Apr-09-2017, 08:15:41 PM
Replies: 975
Views: 95,194
Posted By iride113
Re: Hartge front lip

So is this possible to install by yourself once you get the lip painted? I cannot find instructions or an install DIY.
Forum: E46 M3 (2001-2006) Mon, Mar-13-2017, 09:15:11 PM
Replies: 975
Views: 95,194
Posted By iride113
Re: Hartge front lip

Does anyone have a cut template or measurements of what to cut?
Forum: E46 M3 (2001-2006) Mon, Feb-13-2017, 01:43:44 AM
Replies: 19
Views: 1,052
Posted By iride113
Re: Caliper brackets?? 18z Porsche and gt3 rear.

I did for 6 months then went a different route with the car.
Forum: E46 M3 (2001-2006) Mon, Feb-13-2017, 12:29:52 AM
Replies: 19
Views: 1,052
Posted By iride113
Re: Caliper brackets?? 18z Porsche and gt3 rear.

I bought a front and rear set of 18Z's off a salvaged Porsche last years and had the caliper ears milled off. I was all in at about $1200 for a set milled and painted. Brackets were the hardest thing...
Forum: Pacific Mon, Jan-09-2017, 06:08:53 PM
Replies: 292
Views: 62,453
Posted By iride113
Re: Las vegas area members check in

Really? Cause Arrow is incredibly expensive and can't even align half the cars out there because of the type of equipment they use... but apparently "they know their stuff." :rofl3:
Forum: Pacific Mon, Jan-09-2017, 03:43:09 AM
Replies: 292
Views: 62,453
Posted By iride113
Re: Las vegas area members check in

Go to Southwest Bimmers for your alignment. They just got a new rack! Say Tony sent you and they will help you out.
Forum: E46 M3 (2001-2006) Fri, Jan-06-2017, 11:24:04 AM
Replies: 196
Views: 12,219
Posted By iride113
Re: WPC treated - GB - any part

Any interest in a group buy?
Forum: Parts for Sale/Wanted Fri, Jan-06-2017, 06:57:38 AM
Replies: 3
Views: 175
Posted By iride113
Re: WTB - Front/Reat Aftermaket Sway Bars + End Links

PM me price shipped to 89139. Also how many miles on them.
Forum: Parts for Sale/Wanted Fri, Jan-06-2017, 03:24:27 AM
Replies: 3
Views: 175
Posted By iride113
Forum: E46 M3 (2001-2006) Sat, Dec-31-2016, 11:06:54 AM
Replies: 36
Views: 1,722
Posted By iride113
Re: VOTE: 2017 M3Forum Member Ride Calendar

But here's a roller :)
https://c7.staticflickr.com/1/567/31851642542_fafeddd660_z.jpg (https://flic.kr/p/QwBZCJ)
Forum: E46 M3 (2001-2006) Sat, Dec-31-2016, 11:02:51 AM
Replies: 36
Views: 1,722
Posted By iride113
Re: VOTE: 2017 M3Forum Member Ride Calendar

Submitted but never posted in the album... oh well lol
Forum: E46 M3 (2001-2006) Wed, Dec-28-2016, 08:31:41 AM
Replies: 7
Views: 307
Posted By iride113
Re: Questions about Quad HID retrofit

Thanks but that was the route I was already planning. I was talking about the actual headlight units. There are different part numbers.
Forum: E46 M3 (2001-2006) Wed, Dec-28-2016, 06:25:07 AM
Replies: 7
Views: 307
Posted By iride113
Questions about Quad HID retrofit

I'm going to be buying a donor pair of headlights to do the work on instead of the car's originals. I was leaning towards projectors headlights instead of bi xenon just for price saving. I've got...
Forum: Pacific Fri, Dec-09-2016, 10:38:18 PM
Replies: 292
Views: 62,453
Posted By iride113
Re: Las vegas area members check in

Pro Collision or if you want to try a BMW shop that might be able to do it, Southwest Bimmers. Ask for Shane or Devin and say Tony recommended you. They should be able to take care of it or recommend...
Forum: Member Photos and Videos Thu, Dec-08-2016, 02:38:43 AM
Replies: 4,457
Views: 2,081,972
Posted By iride113
Re: The OFFICIAL Aggressive Wheel Thread - Post your setups

Look back a few pages. I'm running 18x10/11 et 12/16 on a 235/40 and 265/35 in those pictures. No rub and camber isn't crazy. I am building RS's at 18x10/12 and will be running a 285/35 in the rear...
Forum: Member Photos and Videos Thu, Dec-08-2016, 01:41:12 AM
Replies: 4,457
Views: 2,081,972
Posted By iride113
Re: The OFFICIAL Aggressive Wheel Thread - Post your setups

That's not even close to aggressive lol. Should be able to run without too much extra camber at all - especially the front.
Forum: Parts for Sale/Wanted Sun, Dec-04-2016, 09:02:10 PM
Replies: 3
Views: 175
Posted By iride113
WTB - Front/Reat Aftermaket Sway Bars + End Links

As title says, aftermakrer, not OEM bars. If you don't have end links, it's not the end of the world. H&R, UUC, TMS preferred. Price shipped to 89139.
Forum: Parts for Sale/Wanted Thu, Sep-01-2016, 07:22:20 AM
Replies: 17
Views: 1,009
Posted By iride113
Re: Used Performance parts. Priced to sell quickly

Any interest in trades for the S/C kit? Possibly BBS RS/RF's?
Forum: Parts for Sale/Wanted Fri, Aug-26-2016, 10:28:41 AM
Replies: 6
Views: 552
Posted By iride113
Re: Airlift Performance 3P Kit

Willing to part management only? Or cash + autopilot v2 so you can sell as full kit still?
Forum: Member Photos and Videos Sat, Aug-20-2016, 03:33:29 AM
Replies: 4,457
Views: 2,081,972
Posted By iride113
Need to get about another -1 up front and it...

Need to get about another -1 up front and it should be perfect.... But I'm battling this spacer/bbk/offset nightmare first :banghead:
...
Forum: E46 M3 (2001-2006) Sat, Aug-20-2016, 03:23:41 AM
Replies: 14
Views: 2,011
Posted By iride113
Re: eBay Diffuser (seller ID: happybuyitnow168) Review

Really happy with mine. Fitment is 8/10 - I literally put it on in 15 minutes. If I go back under, I'm sure I can make it sit flush which is my only negative. It sits a little out, but I'm sure if I...
Forum: E46 M3 (2001-2006) Sat, Aug-20-2016, 03:22:03 AM
Replies: 5
Views: 648
Posted By iride113
Re: This site sells a GTR rear bumper.

If it's for OEM fenders and not widebody I might jump on it...

Anyone can confirm?
Forum: E46 M3 (2001-2006) Sat, Aug-06-2016, 07:55:14 AM
Replies: 4
Views: 257
Posted By iride113
Re: Question on SAP Emissions Monitor Not Ready?

Hey man, I'm in Vegas too. Just passed smog without my SAP or Post O2's. If you want some help pulling the DME file and editing it yourself to pass, I don't mind helping. My drive cycle took 150 mi...
Forum: E46 M3 (2001-2006) Sat, Aug-06-2016, 07:53:18 AM
Replies: 73
Views: 4,971
Posted By iride113
Re: Cat Cams

Would go for it. Lang Racing is a great company so I would stand by what they stock
Forum: E46 M3 (2001-2006) Sat, Aug-06-2016, 07:51:38 AM
Replies: 30
Views: 2,115
Posted By iride113
Re: 3.91 vs 4.10?

4.10 > unless you're going 3.91 with FI
Forum: E46 M3 (2001-2006) Sun, Jul-24-2016, 11:30:20 AM
Replies: 17
Views: 465
Posted By iride113
Re: Smog nightmare

Nothing works better then just editing the DME to completely wipe all your errors and set everything to ready. I know many people who pass with no SAP, no rear O2's, no cats, etc... E46, Evo, Subi,...
Forum: E46 M3 (2001-2006) Thu, Jul-21-2016, 05:49:49 AM
Replies: 93
Views: 7,720
Posted By iride113
Re: An honest and in depth look at the Status Gruppe SCZA CSL Trunk (4/10)

I have have had all the same exact issues with my trunk. Most I fixed myself using a dremel and lots of patience. However there is no way to fix light going through my weave without painting it. I...
Forum: Pacific Sat, Jul-16-2016, 10:55:01 PM
Replies: 292
Views: 62,453
Posted By iride113
Re: Las vegas area members check in

What do you need coded?
Forum: Parts for Sale/Wanted Tue, Jun-28-2016, 08:28:55 AM
Replies: 2
Views: 226
Posted By iride113
BlendMount for Valentine Radar

Anyone have one lying around before I buy a new one? Cash in hand, shipped to 89148.
...
Forum: E46 M3 (2001-2006) Fri, Jun-10-2016, 01:41:15 AM
Replies: 95
Views: 2,948
Posted By iride113
Re: Aftermarket Radiator wont help Vegas temps??

Didn't read through any of these pages, but I'm in Vegas. Car handles the temperatures like a champ. I replaced the whole cooling system last summer. The biggest key for me is using a 75/25 mixture...
Forum: E46 M3 (2001-2006) Fri, Jun-10-2016, 01:09:01 AM
Replies: 975
Views: 95,194
Posted By iride113
Re: Hartge front lip

If only I wasn't in Vegas. :(
https://c7.staticflickr.com/8/7607/27293898510_e0697b0937_c.jpg https://c3.staticflickr.com/8/7447/27536613626_dc30f2fa61_c.jpg
Forum: Coding and Tuning Thu, Jun-09-2016, 05:24:15 PM
Replies: 4
Views: 648
Posted By iride113
Re: Passing Smog Without Post O2 Sensors

178 Catalytic Converter Efficiency Bank 1, and 179 Catalytic Converter Efficiency Bank 2 are for CEL's. Deleting this will make you not throw CEL's. The other DTC's are separate.
Forum: Coding and Tuning Thu, Jun-09-2016, 04:52:18 AM
Replies: 4
Views: 648
Posted By iride113
Re: Passing Smog Without Post O2 Sensors

Car barely sees the road. Just need it to pass. Interesting part is that I've deleted all above, drove 50 miles (should be good enough for a drive cycle) and my OBD reader still gives me a yellow...
Forum: Coding and Tuning Wed, Jun-08-2016, 02:55:13 AM
Replies: 4
Views: 648
Posted By iride113
Passing Smog Without Post O2 Sensors

Can anyone confirm that removing these DTC's will allow a car with no Post O2 Sensors connected to pass OBD smog?

39 Lambda Sensor Heater Post Cat Bank 1
40 Lambda Sensor Heater Post Cat Bank 2...
Forum: E46 M3 (2001-2006) Sat, Jun-04-2016, 01:41:42 AM
Replies: 15
Views: 592
Posted By iride113
Re: Looking for help to pass smog

I wish it was that simple haha
Forum: E46 M3 (2001-2006) Sat, Jun-04-2016, 01:33:33 AM
Replies: 80
Views: 57,877
Posted By iride113
Re: DIY: O2 Sim Install

Okay update, guys. I got the O2 sim in. Unlike the Sim found in this DIY, Magnum's sim (http://www.magnumtuning.com/en/detail/adjustable-oxygen-sensor-simulator/bmw/3-serie--e46-) has 6 wires instead...
Forum: E46 M3 (2001-2006) Sat, Jun-04-2016, 01:28:28 AM
Replies: 15
Views: 592
Posted By iride113
Re: Looking for help to pass smog

Okay update, guys. I got the O2 sim in. Unlike the Sim found in this DIY (http://www.m3forum.net/m3forum/showthread.php?t=337969), Magnum's sim has 6 wires instead of 4.

2 White - Heater
1 Gray -...
Forum: E46 M3 (2001-2006) Tue, May-31-2016, 11:56:11 PM
Replies: 15
Views: 592
Posted By iride113
Re: Looking for help to pass smog

Vegas. I've had problems in Cali too but Vegas doesn't really care.
Forum: E46 M3 (2001-2006) Tue, May-31-2016, 09:47:21 PM
Replies: 15
Views: 592
Posted By iride113
Re: Looking for help to pass smog

Interesting. May try this if the sims fail. The tune is a mix of Evolve and lots of live tuning so I rather not mess with it.



Literally 99% of techs don't care about visual inspection under...
Forum: E46 M3 (2001-2006) Tue, May-31-2016, 12:01:10 AM
Replies: 15
Views: 592
Posted By iride113
Re: Looking for help to pass smog

That kit is the same as a non-fouler spark plug diy... It won't work but thanks though! I bought the sim kit from the link and will report back.
Forum: E46 M3 (2001-2006) Mon, May-30-2016, 01:51:50 AM
Replies: 15
Views: 592
Posted By iride113
Re: Looking for help to pass smog

Will those allow me to pass smog? If so I'll take them off your hands if you want. I have money ready. PayPal is iRide113@gmail.com if you want to send me an invoice.
Forum: E46 M3 (2001-2006) Mon, May-30-2016, 01:00:28 AM
Replies: 15
Views: 592
Posted By iride113
Re: Looking for help to pass smog

Car doesn't have cats. Euro headers, SGP sec 1 with rasp eliminator, SGP sec 2 X pipe, and SGP SCZA muffler.

Thus, why I coded the ECU to not throw any codes. If I go back to the stock ECU it will...
Forum: E46 M3 (2001-2006) Mon, May-30-2016, 12:18:56 AM
Replies: 15
Views: 592
Posted By iride113
Forum: E46 M3 (2001-2006) Sun, May-29-2016, 09:47:55 PM
Replies: 15
Views: 592
Posted By iride113
Looking for help to pass smog

The car has euro headers, STG full exhaust back from headers, Evolve tune and throws no lights. I've tried twice to get the car smogged and it comes back with "Oxygen sensor not complete" and "oxygen...
Forum: Parts for Sale/Wanted Wed, Apr-06-2016, 10:37:43 PM
Replies: 10
Views: 527
Posted By iride113
Re: E46 M3 Cambe r Plates

Hmm this could be a solution. Do you know if the non-m plates have enough structural integrity to be used on M's or does it not make that big of a difference? At the same time I'm torn between new...
Forum: E46 M3 (2001-2006) Tue, Apr-05-2016, 05:43:14 PM
Replies: 9,417
Views: 625,780
Posted By iride113
Re: What did you do to/for your ///M today?

They are 16 to 18. Offsets aren't too crazy compared to what others run. I was playing around with camber yesterday and it helped a lot. Just want to wait so I can get the toe and alignment done at...
Forum: E46 M3 (2001-2006) Tue, Apr-05-2016, 01:58:01 AM
Replies: 9,417
Views: 625,780
Posted By iride113
Re: What did you do to/for your ///M today?

Yes they are. I need to get an alignment and add some negative camber but I've yet to find an alignment shop who can get their machine to fit my wheels. I'm at -1.8 all around currently.
Forum: E46 M3 (2001-2006) Tue, Apr-05-2016, 12:24:43 AM
Replies: 9,417
Views: 625,780
Posted By iride113
Re: What did you do to/for your ///M today?

Need to get the front adjusted more, and get an alignment still... But got a few photos snapped today.:thumbsup2:

https://farm2.staticflickr.com/1529/25636705954_79f05ff63e_c.jpg...
Forum: Parts for Sale/Wanted Tue, Apr-05-2016, 12:23:41 AM
Replies: 10
Views: 527
Posted By iride113
Re: E46 M3 Cambe r Plates

What can you get out of these plates? I need -4...
Forum: Pacific Tue, Apr-05-2016, 12:22:37 AM
Replies: 292
Views: 62,453
Posted By iride113
Re: Las vegas area members check in

Can anyone recommend an alignment shop in town that uses the old style of alignment rack where they screw on to the lip rather than clamp to the tire? Usually I use Alex at Firestone off of N...
Forum: Parts for Sale/Wanted Sun, Apr-03-2016, 05:39:21 AM
Replies: 10
Views: 527
Posted By iride113
Re: E46 M3 Cambe r Plates

Milage on them and can you send me pictures?
Forum: Parts for Sale/Wanted Sun, Apr-03-2016, 01:41:02 AM
Replies: 10
Views: 527
Posted By iride113
E46 M3 Camber Plates

Vorshlag or GC preferred... Cash in hand, let me know:thumbsup2:
Forum: E46 M3 (2001-2006) Sat, Apr-02-2016, 11:58:17 PM
Replies: 975
Views: 95,194
Posted By iride113
Re: Hartge front lip

I will stand by Mike on this. I've bought multiple pieces from full headers back exhaust, CSL trunk and plan on buying more from him. Things may take extra time to ship or get built but you can't...
Forum: E46 M3 (2001-2006) Fri, Apr-01-2016, 12:17:48 PM
Replies: 7
Views: 711
Posted By iride113
Re: Airlift Airforce Suspension?

Hense why I said "supplied" and not "built."
Forum: E46 M3 (2001-2006) Thu, Mar-31-2016, 07:59:42 AM
Replies: 7
Views: 711
Posted By iride113
Re: Airlift Airforce Suspension?

A lot of companies use the same struts believe it or not. For instance the picture you posted is the same as the kit supplied by BagRiders. In the rear the shocks are your choice. I went with Koni...
Forum: E46 M3 (2001-2006) Wed, Mar-30-2016, 09:04:06 PM
Replies: 7
Views: 711
Posted By iride113
Re: Airlift Airforce Suspension?

IMO stay away from Airforce. They have really bad customer support. Go with BagRiders if you want to go air. Great company with great support for the car.
Forum: E46 M3 (2001-2006) Tue, Mar-15-2016, 12:30:12 AM
Replies: 900
Views: 48,779
Posted By iride113
Forum: E46 M3 (2001-2006) Thu, Feb-25-2016, 12:25:28 AM
Replies: 900
Views: 48,779
Posted By iride113
Re: Gauging interest in Colored Gauge Faces for M3 Clusters (Not Overlays)

Very interested in white, alpina blue, and dark grey with leds. :)
Forum: Coding and Tuning Tue, Feb-23-2016, 08:03:12 PM
Replies: 5,135
Views: 1,497,904
Posted By iride113
Re: Comprehensive MSS54/MSS54HP DME Information

Would anyone be willing to share the full TunerPro maps? I'm trying to tune/advance timing for e85. I have a shop with a dyno and confident in using TunerPro... Just need the full maps. :)
Forum: Pacific Wed, Feb-17-2016, 12:58:12 AM
Replies: 292
Views: 62,453
Posted By iride113
Re: Las vegas area members check in

We can do 2 runs for $50 at Southwest. He won't print out any sheets, but will email all of it to us and we can print them out. Does that work for everyone?
Forum: Pacific Thu, Feb-11-2016, 04:21:47 AM
Replies: 292
Views: 62,453
Posted By iride113
Re: Las vegas area members check in

I'll stop by and ask them tomorrow.
Forum: Pacific Wed, Feb-10-2016, 07:26:51 PM
Replies: 292
Views: 62,453
Posted By iride113
Re: Las vegas area members check in

Talkd to Devin at Southwest Bimmers. He's willing to have us next Saturday for some dyno runs. He uses a Dynocon I believe (comparable to a Mustang dyno). It would be $100 for 4-5 runs per person....
Forum: E46 M3 (2001-2006) Tue, Feb-02-2016, 08:23:30 AM
Replies: 74
Views: 3,639
Posted By iride113
Re: Bagging my M3

That's exactly what I have with Autopilot V2 and Koni's in the rear. :)
Forum: E46 M3 (2001-2006) Mon, Feb-01-2016, 08:25:57 PM
Replies: 74
Views: 3,639
Posted By iride113
Re: Bagging my M3

Agreed. Crazy how many people think their opinions matter... If it's not your money being spent, why do you care what the person is doing with their car?
Forum: E46 M3 (2001-2006) Mon, Feb-01-2016, 06:56:12 PM
Replies: 74
Views: 3,639
Posted By iride113
Re: Bagging my M3

I think most of you would be quite surprised how well air handles when it's correctly set up.
Forum: E46 M3 (2001-2006) Sun, Jan-31-2016, 06:54:37 PM
Replies: 74
Views: 3,639
Posted By iride113
Re: Bagging my M3

Umm... No that's the beauty of air - I can change heights. :parrot:
Forum: E46 M3 (2001-2006) Sat, Jan-30-2016, 11:42:57 PM
Replies: 34
Views: 1,987
Posted By iride113
Forum: E46 M3 (2001-2006) Sat, Jan-30-2016, 11:40:17 PM
Replies: 74
Views: 3,639
Posted By iride113
Re: Bagging my M3

I was skeptical when I put the kit on originally, but 3 months later, I have nothing bad to say. The only scenario at which I would consider changing to a static setup would be if I tracked the car. ...
Forum: E46 M3 (2001-2006) Fri, Jan-29-2016, 08:36:40 PM
Replies: 70
Views: 5,235
Posted By iride113
Re: Evolve Eventuri Intake or BMC Filter with Bimmerworld Elbow?

I've gone through stock gearing, 3.91 and 4.10's. Personally, it depends on what you're going to use the car for. I love 4.10's for a daily N/A build. You're always in the powerband and 3/4 gear...
Forum: Pacific Fri, Jan-29-2016, 12:51:08 AM
Replies: 292
Views: 62,453
Posted By iride113
Re: Las vegas area members check in

I might be able to get a dyno night set up for all of us. I'll check.
Forum: Pacific Thu, Jan-28-2016, 08:10:41 PM
Replies: 292
Views: 62,453
Posted By iride113
Re: Las vegas area members check in

Rather have a dyno night than a drag night. I know my car isn't made to drag lol.
Forum: E46 M3 (2001-2006) Fri, Jan-15-2016, 10:41:04 AM
Replies: 27
Views: 3,028
Posted By iride113
Re: My custom BBK 390x36 HUGE

Would like to buy some brackets! Could you PM me price?
Forum: Parts for Sale/Wanted Sun, Jan-03-2016, 08:41:45 PM
Replies: 0
Views: 135
Posted By iride113
16" BBS RS Faces (5x120)

Looking for original BBS RS 16" faces. Don't need barrels or lips but willing to buy if included. Okay with any condition as long as the price is fair.
Forum: E46 M3 (2001-2006) Sat, Dec-26-2015, 05:00:17 AM
Replies: 70
Views: 5,235
Posted By iride113
Re: Evolve Eventuri Intake or BMC Filter with Bimmerworld Elbow?

Lol buff hurt? I literally said without dyno results, I wouldn't agree. Now that someone posted a link with dyno runs we have actual numbers not just words.
Forum: E46 M3 (2001-2006) Wed, Dec-23-2015, 05:18:33 PM
Replies: 70
Views: 5,235
Posted By iride113
Re: Evolve Eventuri Intake or BMC Filter with Bimmerworld Elbow?

Unless you have any proor, I'm gonna say your butt dyno is feeling a placebo effect.
Forum: E46 M3 (2001-2006) Sat, Dec-19-2015, 08:15:02 AM
Replies: 68
Views: 3,854
Posted By iride113
Re: The votes are in! 2016 M3Forum Calendar!

All nice cars, but kinda what I was thinking haha
Forum: E46 M3 (2001-2006) Fri, Dec-18-2015, 07:13:25 AM
Replies: 70
Views: 5,235
Posted By iride113
Re: Evolve Eventuri Intake or BMC Filter with Bimmerworld Elbow?

This could be something... Wonder if Frank could chime in
Forum: Parts for Sale/Wanted Thu, Dec-17-2015, 03:08:12 AM
Replies: 5
WTB: OEM Trunk
Views: 209
Posted By iride113
Re: OEM Trunk

I have one. Carbon black, and I'm in Vegas. pm me if you want to meet up
Forum: E46 M3 (2001-2006) Wed, Dec-16-2015, 09:19:34 PM
Replies: 70
Views: 5,235
Posted By iride113
Re: Evolve Eventuri Intake or BMC Filter with Bimmerworld Elbow?

Decided against it. I'm already pushing as much power as I can. FI or CSL intake are the only ways I could make more power... Or fully built block. But anyways, for the ~20 whp you can make with the...
Forum: E46 M3 (2001-2006) Tue, Dec-15-2015, 08:51:00 PM
Replies: 70
Views: 5,235
Posted By iride113
Evolve Eventuri Intake or BMC Filter with Bimmerworld Elbow?

Does anyone have dyno numbers? Currently on BMC filter and Bimmerworld elbow, but can get a really good deal on an Eventuri... Seeing if it's worth it.
Forum: E46 M3 (2001-2006) Tue, Dec-15-2015, 07:16:10 AM
Replies: 9,417
Views: 625,780
Posted By iride113
Re: What did you do to/for your ///M today?

Doing the valve adjustment and vanos rebuild, along with 288/280 cams.

Can anyone tell me if these dark marking are normal? Not sludge, just darker...

https://flic.kr/p/Cau2rq

Also what...
Forum: E46 M3 (2001-2006) Sat, Dec-12-2015, 07:50:59 PM
Replies: 17
Views: 1,211
Posted By iride113
Re: Vanos, can it be removed with shroud on?

So in other words, all I need is the pin and I'll be set?
Forum: E46 M3 (2001-2006) Sat, Dec-12-2015, 07:40:54 PM
Replies: 17
Views: 1,211
Posted By iride113
Re: Vanos, can it be removed with shroud on?

Not trying to thread-jack, but can anyone confirm if this will work in place of the BMW cam tool?

http://http://www.ebay.com/ulk/itm/231719328976 (http://www.ebay.com/ulk/itm/231719328976)
...
Forum: E46 M3 (2001-2006) Sat, Dec-12-2015, 07:38:08 PM
Replies: 20
Views: 1,317
Posted By iride113
Re: 4.10 Ring and Pinion Question

Same markings on mine. Got them installed and have driven 1k miles on them no problem. If you're SMG make sure to get it calibrated. Also, change your fluid after 500 miles. Make sure to use the OEM...
Forum: E46 M3 (2001-2006) Wed, Dec-09-2015, 11:22:18 PM
Replies: 78
Views: 3,262
Posted By iride113
Forum: Pacific Tue, Dec-08-2015, 11:14:14 PM
Replies: 292
Views: 62,453
Posted By iride113
Re: Las vegas area members check in

Whoops, my bad.

Does anyone have the cam timing tool I could barrow? UPS lost mine and I am in the middle of vanos rebuild and really need one to barrow ASAP. I'm willing to even pay to rent it....
Showing results 1 to 100 of 304

 
Forum Jump


All times are GMT. The time now is 10:41:58 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
M3Forum.com and M3forum.net is in no way sponsored, endorsed or affiliated by or with BMW NA / BMW AG or any of it's subsidiaries or vendors.
BMW and M3 (E90 M3 | E92 M3 | E93 M3 | E46 M3 | E36 M3 | E30 M3) are registered trademarks of BMW AG.
M3Forum Terms of Service
Copyright 1999-2017 M3Forum.com
BMW M3 owners and enthusiasts with BMW M3 Forums, M3 Photos, M3 Reviews, and more! Get the latest BMW M3 discussions and news.