BMW M3 Forum
BMW M3 Forum BMW M3 Gallery BMW M3 Reviews BMW M3 Social Groups BMW M3 Chat M3Forum Sponsors >>
Loading


Mobile M3forum
Go Back   BMW M3 Forum.com (E30 M3 | E36 M3 | E46 M3 | E92 M3 | F80/X) > Search Forums
Tire Rack Buy Winter Tires Now!
Not a member? Register Now!
Register Gallery All Albums Garage Search Today's Posts Mark Forums Read Calendar FAQ


Showing results 1 to 100 of 4745
Search took 3.98 seconds.
Search: Posts Made By: kokgo20
Forum: Parts for Sale/Wanted Sat, Jul-13-2019, 09:21:32 PM
Replies: 5
Views: 508
Posted By kokgo20
Forum: E46 M3 (2001-2006) Thu, Jul-11-2019, 12:26:38 PM
Replies: 5,288
Views: 475,705
Posted By kokgo20
Forum: Parts for Sale/Wanted Thu, Jul-11-2019, 12:13:39 PM
Replies: 2
Views: 216
Posted By kokgo20
Re: E46 m3 aem infinity with harness, uuc twin disk clutch

Was it used on SMG or MT?
Any chatter?
Which clutch material?
Forum: E46 M3 (2001-2006) Tue, Jul-09-2019, 07:51:21 AM
Replies: 4
Views: 260
Posted By kokgo20
Re: Car disarming itself

Try disconnecting the driver door actuator harness and see if it keeps happening
Forum: Parts for Sale/Wanted Thu, Jun-27-2019, 08:40:38 PM
Replies: 43
Views: 1,494
Posted By kokgo20
Forum: E46 M3 (2001-2006) Thu, Jun-27-2019, 04:36:44 AM
Replies: 8
Views: 489
Posted By kokgo20
Re: DIY: Driveshaft Centering Sleeve

The bread trick didn’t work on mine for some reason
I tore the rubber off, used a puller
Forum: E46 M3 (2001-2006) Sat, Jun-22-2019, 10:43:53 PM
Replies: 51
Views: 2,471
Posted By kokgo20
Re: Short Suspension Rant: TC Kline DA

+1 will vote for Dan, very knowledgeable and very helpful when it comes to customer service and individual setups.
Forum: E46 M3 (2001-2006) Thu, Jun-20-2019, 09:37:11 PM
Replies: 46
Views: 1,283
Posted By kokgo20
Re: Smg hydraulic unit rebuild

I would be in for a set of seals also for that price
Forum: E46 M3 (2001-2006) Wed, Jun-19-2019, 06:29:35 PM
Replies: 60
Views: 2,169
Posted By kokgo20
Re: Got Instagram?

https://www.instagram.com/frankstein_m3/
Forum: E46 M3 (2001-2006) Tue, Jun-18-2019, 12:20:24 AM
Replies: 46
Views: 1,283
Posted By kokgo20
Re: Smg hydraulic unit rebuild

Great thread, i guess i should rebuild mine for the hell of it 123K miles so far
Need the link to the cheaper accumulator $1000 is quit high for that thing.
Forum: E46 M3 (2001-2006) Wed, Jun-12-2019, 10:19:41 PM
Replies: 54
Views: 2,254
Posted By kokgo20
Re: SMG Shift Knob Design

Would love to see SMG peddles design like this

https://uploads.tapatalk-cdn.com/20190612/7b18282ea895a77204a4c2e47a5fb37c.jpg


Sent from my iPhone using Tapatalk
Forum: E46 M3 (2001-2006) Mon, Jun-10-2019, 10:56:03 PM
Replies: 1
Views: 165
Posted By kokgo20
Anyone has an old bad SMG gear actuator?

If anyone has one of these thatís gone bad, I need this banjo bolt ...
Forum: E46 M3 (2001-2006) Fri, Jun-07-2019, 11:21:20 PM
Replies: 5
Views: 316
Posted By kokgo20
Re: CMP Subframe Reinforcement, CMP RTAB and CMP Subframe Bushing

Looks good
did you have separation in the RTABs pockets?
Forum: E46 M3 (2001-2006) Thu, Jun-06-2019, 03:49:19 PM
Replies: 16
Views: 774
Posted By kokgo20
Re: Remote cannister location specifics

If u use black sleeves to go around them they will look stealth
Forum: E46 M3 (2001-2006) Thu, Jun-06-2019, 12:28:42 AM
Replies: 6
Views: 332
Posted By kokgo20
Re: digital coolant temp gauge?

It’s not about extra gauges, just wanted to wire the signal from the stock factory sensor if I could on my current custom digital gauge.
Prefer to have the actual digital reading then just the...
Forum: E46 M3 (2001-2006) Mon, Jun-03-2019, 07:25:33 PM
Replies: 6
Views: 332
Posted By kokgo20
digital coolant temp gauge?

Is it possible to wire a gauge like this...
Forum: E46 M3 (2001-2006) Fri, May-31-2019, 08:54:31 PM
Replies: 1
Views: 119
Posted By kokgo20
Water temp sensor pin on the DME harness?

Does anyone know where are the 2 pins on the DME harness that leads directly to the water temp sensor that's behind the thermostat?
Forum: Parts for Sale/Wanted Fri, May-31-2019, 12:51:55 PM
Replies: 5
Views: 269
Posted By kokgo20
Re: WTB: Passenger Headlight, front fenders, front bumper

I have a passenger headlight, pm sent
Forum: E46 M3 (2001-2006) Thu, May-30-2019, 07:11:39 PM
Replies: 24
Views: 586
Posted By kokgo20
Re: boosted S54 use MAF, MAP or IAT only and why? Who is your tuner?

Wouldn’t the stock MAP sensor be enough for a super charger 11~12 psi boost limit also?
Forum: E46 M3 (2001-2006) Thu, May-30-2019, 12:15:49 AM
Replies: 24
Views: 586
Posted By kokgo20
Re: boosted S54 use MAF, MAP or IAT only and why? Who is your tuner?

Going with a MAP sensor, does my HP DME require any hardware modifications?
Forum: E46 M3 (2001-2006) Wed, May-29-2019, 11:31:05 PM
Replies: 24
Views: 586
Posted By kokgo20
Re: boosted S54 use MAF, MAP or IAT only and why? Who is your tuner?

The reason i was asking was mostly for AFRs not much about loss of power
How much difference should i see or feel by adding a map sensor?
Forum: E46 M3 (2001-2006) Wed, May-29-2019, 10:56:26 PM
Replies: 24
Views: 586
Posted By kokgo20
Re: boosted S54 use MAF, MAP or IAT only and why? Who is your tuner?

With Alpha N wouldn't AFRs change as the elevation changes?
Forum: E46 M3 (2001-2006) Wed, May-29-2019, 10:17:36 PM
Replies: 24
Views: 586
Posted By kokgo20
Re: boosted S54 use MAF, MAP or IAT only and why? Who is your tuner?

Same here, i don't want the car tuned and if i go somewhere else with different elevation the AFR will be all over the place if i understand that correctly.
Forum: E46 M3 (2001-2006) Wed, May-29-2019, 09:54:28 PM
Replies: 24
Views: 586
Posted By kokgo20
Forum: E46 M3 (2001-2006) Wed, May-29-2019, 09:38:11 PM
Replies: 24
Views: 586
Posted By kokgo20
boosted S54 use MAF, MAP or IAT only and why? Who is your tuner?

To boosted S54 members
Are you using MAF, MAP or IAT only and why?
Who is your tuner?

School me on this, I'm not an expert but doesn't the DME need to know how much air is going through the...
Forum: Parts for Sale/Wanted Wed, May-29-2019, 01:14:42 PM
Replies: 4
Views: 267
Posted By kokgo20
Re: Clutch Masters FX725 Twin Disc Clutch Kit and Hydraulic Release Bearing

Was this installed on SMG or MT?
Assuming the bearing was used instead of the clutch fork?
Any chatter with this setup?
Forum: Member Journals Mon, May-27-2019, 09:37:12 PM
Replies: 222
Views: 55,316
Posted By kokgo20
Re: My 2004 PY build thread

Awesome, i will pm you when we decide on the day.



PM sent
Forum: E46 M3 (2001-2006) Mon, May-27-2019, 12:15:17 AM
Replies: 31
Views: 1,145
Posted By kokgo20
Re: SMG owners, can you feel the SMG pump slipping the clutch?

Yes, bought a used one, but I don’t think they r that expensive new anyway
Forum: Member Journals Fri, May-24-2019, 04:16:22 AM
Replies: 222
Views: 55,316
Posted By kokgo20
Re: My 2004 PY build thread

Thanks gentlemen!!
I actually may make a couple of days trip to Nashville soon, is there a weekly cars & Coffee or GTG?
Forum: E46 M3 (2001-2006) Fri, May-24-2019, 02:40:42 AM
Replies: 19
Views: 702
Posted By kokgo20
Re: AA Supercharger- Rich at idle

Did you use any type of light grease when installing? if not i would use some on the O rings to make sure it doesn't bind while installing causing leaks.
Forum: E46 M3 (2001-2006) Thu, May-23-2019, 10:26:36 PM
Replies: 23
Views: 2,928
Posted By kokgo20
Re: Rotrex C38-92 disassembly and possible repairs

My buddy machined the shaft down to 10mm, and we milled the housing to 22mm in order for me to use a common available Viton seal 10x22x6 "available on eBay. unfortunately i didn't take pics of this...
Forum: Member Journals Thu, May-23-2019, 04:11:53 PM
Replies: 222
Views: 55,316
Posted By kokgo20
Re: My 2004 PY build thread

This is what simple green can do!
Love how it leaves a mat finish on plastics
https://uploads.tapatalk-cdn.com/20190523/f3da173ee3b48e8a0a0f4367f194c2fb.jpg...
Forum: E46 M3 (2001-2006) Thu, May-23-2019, 01:36:31 PM
Replies: 143
Views: 7,663
Posted By kokgo20
Re: Breakthrough discovery about the Spal 30102082 Fan! The Most powerful sealed fan

This adapter wouldnít give you ground because of the 2 O rings that are on it.
Forum: E46 M3 (2001-2006) Wed, May-22-2019, 10:08:31 PM
Replies: 31
Views: 1,145
Posted By kokgo20
Re: SMG owners, can you feel the SMG pump slipping the clutch?

Clutch slave cylinder can do that.
I had mine slip if i shift hard on low RPM once the car gets hot. replaced the salve cylinder and it seems to be gone so far.
Forum: E46 M3 (2001-2006) Wed, May-22-2019, 04:43:26 PM
Replies: 31
Views: 1,145
Posted By kokgo20
Forum: E46 M3 (2001-2006) Thu, May-16-2019, 05:26:23 AM
Replies: 4
Views: 257
Posted By kokgo20
Re: Laser Fog Light

What’s the benefit?
Forum: E46 M3 (2001-2006) Thu, May-16-2019, 02:02:34 AM
Replies: 5
Views: 308
Posted By kokgo20
Re: Wheel Alignment Query

Hey

What toe degrees are you running with 29 offset?
Forum: E46 M3 (2001-2006) Wed, May-15-2019, 09:20:46 PM
Replies: 26
Views: 701
Posted By kokgo20
Re: Who can convert my HP DME to stock CSL?

+1.
Is there any software benefits over the US file?
Will that modified CSL work with a MAP sensor?
What r the pros and cons of this modified CSL file?
Forum: E46 M3 (2001-2006) Wed, May-15-2019, 07:19:50 PM
Replies: 26
Views: 701
Posted By kokgo20
Re: Who can convert my HP DME to stock CSL?

Is there any benefits of doing that over the modified DME in boosted application with a map sensor?
Forum: E46 M3 (2001-2006) Wed, May-15-2019, 04:11:01 PM
Replies: 26
Views: 701
Posted By kokgo20
Re: Who can convert my HP DME to stock CSL?

Frank's HP DME conversion is $475, i was looking for something cheaper, i like Kassel's price $225
I may get Kassel to do the hardware conversion and Frank to re-tune.
I was wondering if any forum...
Forum: E46 M3 (2001-2006) Wed, May-15-2019, 03:48:38 PM
Replies: 26
Views: 701
Posted By kokgo20
Re: Who can convert my HP DME to stock CSL?

I guess I should have explained in details, since their price is good on the DME conversion, I was gonna get their map sensor setup and retune since my blower is pumping more air now, and thinking of...
Forum: E46 M3 (2001-2006) Wed, May-15-2019, 04:28:07 AM
Replies: 26
Views: 701
Posted By kokgo20
Re: Who can convert my HP DME to stock CSL?

Unfortunately Kassel can’t help much since their map sensor setup doesn’t support boost so there is no point of their CSL conversion
Forum: E46 M3 (2001-2006) Tue, May-14-2019, 11:29:34 PM
Replies: 26
Views: 701
Posted By kokgo20
Who can convert my HP DME to stock CSL?

Who can convert my HP DME to stock CSL?
I understand that it needs to be on a bench.
Forum: F80 M3 (Sedan) / F82 M4 (Coupe) / F83 M4 (Convertible) : (2015-TBD) Mon, May-13-2019, 11:29:01 PM
Replies: 4
Views: 472
Posted By kokgo20
Re: Gauging interest in building custom digital gauges

Air suspension pressure
Ethanol- Gasoline ratio
Fuel pressure
fuel level
IAT
Nitros pressure
Oil pressure
Oil / water temps
Pyrometer / Exhaust-Gas Temp
Transmission Temp
Forum: E46 M3 (2001-2006) Fri, May-10-2019, 03:50:29 AM
Replies: 56
Views: 3,281
Posted By kokgo20
Re: J-Fiber CF Driveshaft Thread!

When some of you guys say no vibration, did you have vibration on the stock DS? if so how old or many miles are on the stock ones?
Forum: Parts for Sale/Wanted Fri, May-10-2019, 03:25:14 AM
Replies: 12
Views: 1,113
Posted By kokgo20
Re: White TE37sL 18x9.5 +22 square

one of my fav wheels, GLWS
Forum: E46 M3 (2001-2006) Thu, May-09-2019, 11:48:50 PM
Replies: 30
Views: 1,742
Posted By kokgo20
Re: FYI: Center Console Prices Jumped 3x

I guess it's time to wrap mine in leather
Forum: F80 M3 (Sedan) / F82 M4 (Coupe) / F83 M4 (Convertible) : (2015-TBD) Thu, May-09-2019, 11:22:15 PM
Replies: 4
Views: 472
Posted By kokgo20
Gauging interest in building custom digital gauges

Gauging interest in building custom digital gauges, fitted into about anything, for any make or model.
Examples of my gauges

E46...
Forum: E36 M3 (1992-1999) Thu, May-09-2019, 03:16:38 PM
Replies: 21
Views: 1,001
Posted By kokgo20
Re: Gauging interest in building custom digital gauges

That's true, but keep in mind the cost of the board that has to be built for this that's in my opinion can double the cost here.

Simpler, extra sensors and cheaper VS more complex, extra...
Forum: E36 M3 (1992-1999) Thu, May-09-2019, 03:05:48 PM
Replies: 21
Views: 1,001
Posted By kokgo20
Re: Gauging interest in building custom digital gauges

I totally understand, i had E36 in the past.
The filter will cover the vent from one side to the other, in the E46 it has a separator in the middle that's why it's 2 separate sections.
My plan for...
Forum: E36 M3 (1992-1999) Thu, May-09-2019, 03:38:46 AM
Replies: 21
Views: 1,001
Posted By kokgo20
Re: Gauging interest in building custom digital gauges

Unfortunately my supplier doesnít have dot matrix.
As far as the E36 application, it will look exactly the same as the E46 except in the E36 vents.
Forum: Parts for Sale/Wanted Wed, May-08-2019, 10:52:53 PM
Replies: 24
Views: 1,038
Posted By kokgo20
Re: Gauging interest in building custom digital gauges

Thank you


4 more deposits to make that deal happen.
Forum: Parts for Sale/Wanted Wed, May-08-2019, 11:32:08 AM
Replies: 24
Views: 1,038
Posted By kokgo20
Re: Gauging interest in building custom digital gauges

Yes sir, very accurate
Pm me if u r interested
Forum: Parts for Sale/Wanted Tue, May-07-2019, 10:56:20 PM
Replies: 24
Views: 1,038
Posted By kokgo20
Re: Gauging interest in building custom digital gauges

Any time bud!


Absolutely, it can be done in a dual gauge for each temp or single gauge like mine with a toggle switch.
Pm me if you are interested
Forum: Parts for Sale/Wanted Tue, May-07-2019, 10:13:46 PM
Replies: 24
Views: 1,038
Posted By kokgo20
Forum: E90 M3 (Sedan) | E92 M3 (Coupe) | E93 M3 (Convertible) (2008-2013) Tue, May-07-2019, 10:12:59 PM
Replies: 3
Views: 489
Posted By kokgo20
Forum: Parts for Sale/Wanted Mon, May-06-2019, 09:44:34 PM
Replies: 24
Views: 1,038
Posted By kokgo20
Re: Gauging interest in building custom digital gauges

definitely can be done, just let me know what you need and i will make it happen.
Forum: Parts for Sale/Wanted Mon, May-06-2019, 09:29:05 PM
Replies: 24
Views: 1,038
Posted By kokgo20
Forum: E36 M3 (1992-1999) Mon, May-06-2019, 07:48:31 PM
Replies: 21
Views: 1,001
Posted By kokgo20
Re: Gauging interest in building custom digital gauges

Good call, will check if itís available to have on the gauges
Forum: Member Journals Mon, May-06-2019, 05:44:10 PM
Replies: 222
Views: 55,316
Posted By kokgo20
Re: My 2004 PY build thread

Blower rebuild update
http://m3forum.net/m3forum/showthread.php?t=598558&page=3
Forum: Parts for Sale/Wanted Mon, May-06-2019, 05:42:41 PM
Replies: 24
Views: 1,038
Posted By kokgo20
Re: Gauging interest in building custom digital gauges

Itís all custom, posted in my build thread
Forum: E46 M3 (2001-2006) Mon, May-06-2019, 04:05:01 PM
Replies: 23
Views: 2,928
Posted By kokgo20
Rotrex C38-92 disassembly and possible repairs

Let me start this by saying that this is not an average thing to do on your own without help, Jack is very good at educating and working with anyone.

Let’s start by taking the blower apart again...
Forum: E36 M3 (1992-1999) Mon, May-06-2019, 03:45:49 PM
Replies: 21
Views: 1,001
Posted By kokgo20
Gauging interest in building custom digital gauges

Gauging interest in building custom digital gauges, fitted into about anything, for any make or model.
Examples of my gauges

E46...
Forum: E90 M3 (Sedan) | E92 M3 (Coupe) | E93 M3 (Convertible) (2008-2013) Mon, May-06-2019, 03:45:19 PM
Replies: 3
Views: 489
Posted By kokgo20
Gauging interest in building custom digital gauges

Gauging interest in building custom digital gauges, fitted into about anything, for any make or model.
Examples of my gauges

E46...
Forum: Parts for Sale/Wanted Mon, May-06-2019, 03:39:20 PM
Replies: 24
Views: 1,038
Posted By kokgo20
Re: Gauging interest in building custom digital gauges

PMs replied

That's the main reason i had to think of something else with an OEM look.

Everything is possible, depends on what you need, pm me with more details and we can figure something out....
Forum: Parts for Sale/Wanted Mon, May-06-2019, 12:40:35 AM
Replies: 24
Views: 1,038
Posted By kokgo20
Re: Gauging interest in building custom digital gauges

Is about 2”X1”, display can be a little smaller depending on the application
Example of the E90 posted above
Forum: Parts for Sale/Wanted Sun, May-05-2019, 11:47:10 PM
Replies: 24
Views: 1,038
Posted By kokgo20
Gauging interest in building custom digital gauges

Gauging interest in building custom digital gauges, fitted into about anything, for any make or model.
Examples of my gauges

E46...
Forum: E46 M3 (2001-2006) Fri, May-03-2019, 12:01:58 AM
Replies: 39
Views: 970
Posted By kokgo20
Re: SMG Brushless motor

I believe because it's brushless, the brushes & commutator wear normally what kill this motor
Forum: E46 M3 (2001-2006) Fri, May-03-2019, 12:00:43 AM
Replies: 39
Views: 970
Posted By kokgo20
Re: SMG Brushless motor

The shaft needs to be machined to match the pump drive
Forum: Parts for Sale/Wanted Thu, May-02-2019, 03:33:28 PM
Replies: 1
Views: 183
Posted By kokgo20
Forum: Parts for Sale/Wanted Wed, May-01-2019, 09:53:31 PM
Replies: 1
Views: 183
Posted By kokgo20
Custom driver side air vent gauge case

I’m selling my custom driver side air vent gauge case. I moved my gauge over to the center vent. You can use this setup and put your own gauge in it behind the filter.
I used VEI systems open frame...
Forum: Member Journals Wed, May-01-2019, 04:51:33 PM
Replies: 222
Views: 55,316
Posted By kokgo20
Re: My 2004 PY build thread

I have innovate LC-2: Digital Wideband "Lambda" O2 Controller that feeds it's output to the digital gauge.
https://www.innovatemotorsports.com/products/lc2.php
If you talk to VEI they will tell you...
Forum: Member Journals Sun, Apr-28-2019, 10:26:24 PM
Replies: 222
Views: 55,316
Posted By kokgo20
Re: My 2004 PY build thread

Emblem came in, now the valve cover is complete.
https://uploads.tapatalk-cdn.com/20190428/8e5eabc0465f81ef423980fd957976bc.jpg


Sent from my iPhone using Tapatalk
Forum: E46 M3 (2001-2006) Sun, Apr-28-2019, 02:56:15 AM
Replies: 6
Views: 267
Posted By kokgo20
Forum: E46 M3 (2001-2006) Sat, Apr-27-2019, 04:18:08 PM
Replies: 6
Views: 267
Posted By kokgo20
Re: Car pulls to left (Braking) - Fresh FCAB, alignment and new tires

Left wheel gets hotter than the right? If so then it’s a sticky caliper
Forum: Member Journals Fri, Apr-26-2019, 04:54:59 AM
Replies: 222
Views: 55,316
Posted By kokgo20
Re: My 2004 PY build thread

Thank you gentlemen
Used Hot glue from the back side on top and bottom to hold it to the actual vent and the filter.
Forum: E46 M3 (2001-2006) Wed, Apr-24-2019, 01:49:58 AM
Replies: 42
Views: 1,418
Posted By kokgo20
Re: DIY - headlight intake / temps recorded

Gauge is complete now
http://m3forum.net/m3forum/showthread.php?t=480970&page=21
Forum: Member Journals Tue, Apr-23-2019, 07:03:55 AM
Replies: 222
Views: 55,316
Posted By kokgo20
Re: My 2004 PY build thread

iPhone pictures
https://uploads.tapatalk-cdn.com/20190423/27f7c1b8092077dca0033312b38b8e42.jpghttps://uploads.tapatalk-cdn.com/20190423/c4861c5776364f5d2e064c123d0a4b84.jpg


Sent from my iPhone...
Forum: Member Journals Tue, Apr-23-2019, 07:00:59 AM
Replies: 222
Views: 55,316
Posted By kokgo20
My 2004 PY build thread

Tonight I decided to move the boost & AFR gauge from the driver side air vent to the center vent for a better even look.
This is how the filter comes...
Forum: E46 M3 (2001-2006) Fri, Apr-19-2019, 12:19:09 AM
Replies: 10,081
Views: 676,476
Posted By kokgo20
Forum: E46 M3 (2001-2006) Wed, Apr-17-2019, 09:54:21 PM
Replies: 42
Views: 1,418
Posted By kokgo20
Re: DIY - headlight intake / temps recorded

Nothing special, just a simple plastic plate. I decided to move all the switches I have in one place with a usb for charging
E90 Push to start button replaces the cigarette lighter. I can close the...
Forum: E46 M3 (2001-2006) Wed, Apr-17-2019, 09:39:16 PM
Replies: 42
Views: 1,418
Posted By kokgo20
DIY - headlight intake / temps recorded

This is the gauge i used
...
Forum: E46 M3 (2001-2006) Wed, Apr-17-2019, 05:52:40 PM
Replies: 42
Views: 1,418
Posted By kokgo20
Re: DIY - headlight intake / temps recorded

I have AFR & boost on the driver side
This is an open frame gauge from VEI systems that I built in the vents with a fully functional vents.
Check my build thread for more pics. I will be posting...
Forum: E46 M3 (2001-2006) Tue, Apr-16-2019, 09:27:07 PM
Replies: 42
Views: 1,418
Posted By kokgo20
Re: DIY - headlight intake / temps recorded

You can do something like mine, Iím using the temp gauge to read my coolant & my supercharger blower temps with a toggle switch, you can use the same gauge for many temps functions as u wish.
...
Forum: E46 M3 (2001-2006) Tue, Apr-16-2019, 02:48:54 AM
Replies: 10,081
Views: 676,476
Posted By kokgo20
Re: What did you do to/for your ///M today?

Posted a double pics by a mistake
https://uploads.tapatalk-cdn.com/20190416/31267fdb4e14f2725a4519dcddd4380b.jpg



Sent from my iPhone using Tapatalk
Forum: Member Journals Mon, Apr-15-2019, 11:26:43 PM
Replies: 222
Views: 55,316
Posted By kokgo20
Re: My 2004 PY build thread

It looks nice and good for coils cooling
Thankful to my buddy who has a machine shop, defiantly a dremel won't be an option.
Forum: E46 M3 (2001-2006) Mon, Apr-15-2019, 11:10:17 PM
Replies: 10,081
Views: 676,476
Posted By kokgo20
Re: What did you do to/for your ///M today?

Milled my spare engine cover, new emblem is on the way...
Forum: Member Journals Mon, Apr-15-2019, 11:08:10 PM
Replies: 222
Views: 55,316
Posted By kokgo20
Re: My 2004 PY build thread

Milled my engine cover, now it needs a new emblem.

https://uploads.tapatalk-cdn.com/20190415/183f315550992abfb4cf5de0b6156fe9.jpg...
Forum: E46 M3 (2001-2006) Sun, Apr-14-2019, 10:30:29 PM
Replies: 45
Views: 1,873
Posted By kokgo20
Re: Help removing head

Do you mean the intake cam bolts broke and pistons hit the valves or the bolts just backed out?
you have to remove the metal clips securing the injector harness, it's a little PITA but with the...
Forum: E46 M3 (2001-2006) Sun, Apr-14-2019, 06:06:41 AM
Replies: 10,081
Views: 676,476
Posted By kokgo20
Re: What did you do to/for your ///M today?

Finished rebuilding my Rotrex blower
Forum: E46 M3 (2001-2006) Thu, Apr-11-2019, 08:26:44 PM
Replies: 15
Views: 700
Posted By kokgo20
Re: anyone else have a hole in their wheelwell?

Use Por 15 as a rust preventative then plug it with a rubber plug.
Forum: E46 M3 (2001-2006) Thu, Apr-11-2019, 08:09:43 PM
Replies: 17
Views: 493
Posted By kokgo20
Re: Heat shield wrap

Do you guys have temp sensors in your CSL boxes? if so, it would be a good idea if you can note temps before and after.
Forum: E46 M3 (2001-2006) Thu, Apr-11-2019, 02:08:28 PM
Replies: 17
Views: 493
Posted By kokgo20
Re: Heat shield wrap

Just wondering if anyone / members have any type of data logging of before and after temps on the same conditions
Forum: E46 M3 (2001-2006) Thu, Apr-11-2019, 02:25:35 AM
Replies: 17
Views: 493
Posted By kokgo20
Re: Heat shield wrap

The silver tape sounds like a god option for me Thank you! :hattip:
Forum: E46 M3 (2001-2006) Thu, Apr-11-2019, 01:17:53 AM
Replies: 17
Views: 493
Posted By kokgo20
Heat shield wrap

I'm looking to wrap a few pieces in my engine bay to reflect heat and keep things cool.
I see most people using a gold tape, is this the right tape to use?...
Forum: E46 M3 (2001-2006) Mon, Apr-08-2019, 10:39:21 PM
Replies: 5,288
Views: 475,705
Posted By kokgo20
Re: Do you take cell phone pics of your m3 constantly Cell phone snapshot thread

I can see that working very well on all colors, but I still canít capture if it would look good or not on PY
Forum: E46 M3 (2001-2006) Mon, Apr-08-2019, 04:54:48 PM
Replies: 5,288
Views: 475,705
Posted By kokgo20
Re: Do you take cell phone pics of your m3 constantly Cell phone snapshot thread

Do you have yellow halogen?
Do you have any pics of it in the day light with the AES off?
Considering doing this to my car but dunno how it would look on PY, I know it looks great on a lot other...
Forum: Parts for Sale/Wanted Sun, Apr-07-2019, 08:22:32 PM
Replies: 684
Views: 55,762
Posted By kokgo20
Re: Round 2: Genuine OE CSL Boot-Lid Group Buy #2

Price shipped to 38027 please.
Forum: Parts for Sale/Wanted Mon, Apr-01-2019, 08:57:59 PM
Replies: 23
Views: 918
Posted By kokgo20
Re: Used OE Rod Bearings

I have a set of used rod bearings in way better shape than OP's for $60 shipped.
Forum: Parts for Sale/Wanted Mon, Apr-01-2019, 12:40:39 PM
Replies: 2
Views: 315
Posted By kokgo20
Showing results 1 to 100 of 4745

 
Forum Jump


All times are GMT. The time now is 02:14:15 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
M3Forum.com and M3forum.net is in no way sponsored, endorsed or affiliated by or with BMW NA / BMW AG or any of it's subsidiaries or vendors.
BMW and M3 (E90 M3 | E92 M3 | E93 M3 | E46 M3 | E36 M3 | E30 M3) are registered trademarks of BMW AG.
M3Forum Terms of Service
Copyright ©1999-2017 M3Forum.com
BMW M3 owners and enthusiasts with BMW M3 Forums, M3 Photos, M3 Reviews, and more! Get the latest BMW M3 discussions and news.