BMW M3 Forum
BMW M3 Forum BMW M3 Gallery BMW M3 Reviews BMW M3 Social Groups BMW M3 Chat M3Forum Sponsors >>
Loading


Mobile M3forum
Go Back   BMW M3 Forum.com (E30 M3 | E36 M3 | E46 M3 | E92 M3 | F80/X) > Search Forums
Tire Rack Buy Winter Tires Now!
Not a member? Register Now!
Register Gallery All Albums Garage Search Today's Posts Mark Forums Read Calendar FAQ


Showing results 1 to 100 of 819
Search took 0.06 seconds.
Search: Posts Made By: NZ_M3
Forum: E46 M3 (2001-2006) Sat, May-11-2019, 08:09:25 AM
Replies: 168
Views: 10,028
Posted By NZ_M3
Re: Input on possible CSL bumper and trunk creation

I have one minor issue with this bumper
It is missing a locating notch for the intake grill. Without this notch the grill does not seat correctly if you use the stock ducting.
...
Forum: E46 M3 (2001-2006) Tue, Apr-30-2019, 08:20:49 AM
Replies: 58
Views: 3,109
Posted By NZ_M3
Re: New karbonius autoclave

As stated the resin is the parent material, the carbon the reinforcer, thus the P actually stands for Polymer not plastics as commonly repeated.

It is simply not possible to mass produce the roof...
Forum: E46 M3 (2001-2006) Tue, Apr-30-2019, 12:46:37 AM
Replies: 58
Views: 3,109
Posted By NZ_M3
Re: New karbonius autoclave

Actually I don’t think it is looking at all the production videos and books and articles I’ve read about it.

It is an automated proprietary process that BMW came up with to mass produce roofs in...
Forum: E46 M3 (2001-2006) Mon, Apr-29-2019, 11:19:40 PM
Replies: 42
Views: 942
Posted By NZ_M3
Re: Intake manifold clamps

Oetiker all the way ... they are reusable multiple times with the correct tool and seal correctly and without interference. I don't get why you would find them difficult to use? They are very well...
Forum: E46 M3 (2001-2006) Fri, Apr-26-2019, 09:21:23 PM
Replies: 25
Views: 402
Posted By NZ_M3
Re: SMG pump pressure and priming question

INPA will charge the pump to 85bar then switch off
Forum: E46 M3 (2001-2006) Mon, Apr-15-2019, 08:46:42 PM
Replies: 258
Views: 14,240
Posted By NZ_M3
Re: Cobra Nogaro picture thread!

Spotted these on IG
Someone in the UK had it retrimmed in CSL type fabric - actually looks pretty good.
...
Forum: E46 M3 (2001-2006) Sat, Apr-13-2019, 04:38:22 AM
Replies: 2
Views: 232
Posted By NZ_M3
Re: OE CSL Ducting Positioning Help

http://i115.photobucket.com/albums/n319/M3_Power/IMG_8194_zpsj9ibkccl.jpg


http://i115.photobucket.com/albums/n319/M3_Power/IMG_8190_zpsgowtgdzj.jpg
Forum: E46 M3 (2001-2006) Fri, Mar-29-2019, 10:07:35 PM
Replies: 168
Views: 10,028
Posted By NZ_M3
Re: Input on possible CSL bumper and trunk creation

If JC makes a Wethje quality CSL rear boot like this then it’d be worth considering

http://i115.photobucket.com/albums/n319/M3_Power/CSL%20Airbox/Prototype%20CSL%20Airbox/3-2_zps63b16bf3.jpg
Forum: E46 M3 (2001-2006) Fri, Mar-29-2019, 01:02:47 AM
Replies: 49
Views: 1,941
Posted By NZ_M3
Re: Subframe panels cracking – weak panels or bad design subframe?

Oddly Reddish says they have never seen an E46 Compact rear floor failure even with s54 transplanted.

The design error was in the way the mount points were incorporated into the floor ... had bmw...
Forum: Coding and Tuning Thu, Mar-28-2019, 08:35:59 PM
Replies: 18
Views: 979
Posted By NZ_M3
Re: DIS downloand

Are you running a Native install or vmware?

I’d share but I didn’t create the disc. But as I said head over to bimmerforums and find Revtor (yes that Revtor known for NCS expert files) and ask him...
Forum: E46 M3 (2001-2006) Thu, Mar-28-2019, 08:13:33 PM
Replies: 37
Views: 1,077
Posted By NZ_M3
Re: CSL Exhaust Valve Weight??

:greenchai

No they are shaped exactly the same as the BMW Motorsport P54 exhaust valves without the coating. But they are sodium filled like the stock valves.
Forum: E46 M3 (2001-2006) Thu, Mar-28-2019, 07:04:58 AM
Replies: 37
Views: 1,077
Posted By NZ_M3
Re: CSL Exhaust Valve Weight??

http://i115.photobucket.com/albums/n319/M3_Power/DB0431A8-D274-47AF-9341-4141F851CE4D_zpskb5kltkc.jpg
Forum: Parts for Sale/Wanted Thu, Mar-28-2019, 06:17:09 AM
Replies: 4
Views: 232
Posted By NZ_M3
Re: WTT: BNIB Schrick 288/280 for CSL Camshafts

Tera, email me if you want to sell these cams outright as I am keen!
Forum: E46 M3 (2001-2006) Thu, Mar-28-2019, 06:14:44 AM
Replies: 37
Views: 1,077
Posted By NZ_M3
Re: CSL Exhaust Valve Weight??

I’ll measure mine and post up a photo. Unfortunately I don’t have a stock valve on hand to compare.
Forum: E46 M3 (2001-2006) Thu, Mar-28-2019, 06:13:01 AM
Replies: 168
Views: 10,028
Posted By NZ_M3
Re: Input on possible CSL bumper and trunk creation

I don’t understand why no one (other than Vorsteiner) managed to also create the mounting tabs that hold the centre grill for these bumpers?? It’s not like it is any harder to create than the...
Forum: Coding and Tuning Sun, Mar-24-2019, 08:15:24 PM
Replies: 18
Views: 979
Posted By NZ_M3
Re: DIS downloand

Wrong I have two native installs that runs on ssd

Revtor figured out how to make it run on a ssd natively about three years ago. The only thing we have not been able to do is to get the genuine...
Forum: Parts for Sale/Wanted Sun, Mar-17-2019, 02:21:55 AM
Replies: 66
Views: 3,569
Posted By NZ_M3
Re: Die wethje airbox

https://forums.m3cutters.co.uk/threads/bnib-genuine-csl-carbon-airbox.209939/
Forum: Faults, Fixes and DIY Fri, Mar-15-2019, 02:56:06 AM
Replies: 1
Views: 351
Posted By NZ_M3
CSL Bumper wiring DIY from E46 M3 Wiring

Some maybe aware, but the CSL front bumper wiring loom is NLA

So I've decided to look into how easy it is to turn the stock E46 M3 wiring into a CSL one. Turns out pretty bloody easy, so I've...
Forum: Parts for Sale/Wanted Thu, Mar-07-2019, 08:48:50 PM
Replies: 12
Views: 785
Posted By NZ_M3
Re: Vorsteiner V1 CSL bumper (used)

The early bumpers didn’t carry that sticker only the later ones did.
I had an early V1 and it didn’t have the sticker.

You can usually tell if it is a Genuine Vorsteiner by looking at the side...
Forum: E46 M3 (2001-2006) Sat, Mar-02-2019, 07:58:20 PM
Replies: 85
Views: 3,169
Posted By NZ_M3
Re: Japanese CSL owner converts to manual

Fxxk me anything sub minute at Tsukuba is absolutely flying ... a 58.118 is amazing for a NA car!
Forum: E46 M3 (2001-2006) Sat, Mar-02-2019, 04:19:47 AM
Replies: 12
Views: 564
Posted By NZ_M3
Re: Maxed out on keys...options?

Ak90 or equivalent, make the key slots you don’t have as unused then burn new transponder for those slots and get a clone blank key from ebay or equivalent and have it cut to then correct key code to...
Forum: E46 M3 (2001-2006) Thu, Feb-28-2019, 09:25:26 PM
Replies: 13
Views: 424
Posted By NZ_M3
Re: MComposit - from Bulgaria - any experience?

Gosh No love for Bulgarians?

Reason I posted was because some of the feedback I’ve read about about them seem good from the Mitsubishi Evo crowd. The photos he posted of the diffuser also looked...
Forum: E46 M3 (2001-2006) Thu, Feb-28-2019, 07:45:22 PM
Replies: 13
Views: 424
Posted By NZ_M3
MComposit - from Bulgaria - any experience?

Stumbled across this outfit a while back it seems he has been making composit parts for the CSL recently, the full lot, diffuser, front bumper, rear bootlid and centre console. His work looks to be...
Forum: E46 M3 (2001-2006) Wed, Feb-27-2019, 07:17:35 AM
Replies: 85
Views: 3,169
Posted By NZ_M3
Re: Japanese CSL owner converts to manual

This is by all means not the first car. I know of two in the UK before this one in Japan.

Technically speaking there’s been a few race converted CSLs that no longer run SMG (including another...
Forum: Off Topic Fri, Feb-22-2019, 12:25:02 AM
Replies: 144
Views: 6,624
Posted By NZ_M3
Re: Anyone own a real csl in here? Need help!

Lol anyone can quote prices ... not many can actually deliver the goods.

As I said there’s zero stock and no next batch eta so my suspicion is the airbox is going NLA which is consistent with...
Forum: Off Topic Thu, Feb-21-2019, 11:43:03 PM
Replies: 144
Views: 6,624
Posted By NZ_M3
Re: Anyone own a real csl in here? Need help!

Man you are all over the place Jared!

Instead of asking one or two reliable sources about it you ask multiple people to try and source you something that you already know the price of. Just...
Forum: Coding and Tuning Thu, Feb-21-2019, 07:32:26 PM
Replies: 16
Views: 1,587
Posted By NZ_M3
Re: Is the R270+ still the best option for virginizing clusters

I don’t think it’s actually people not divulging about this more a case no one actually uses the R270 for the e46 cluster. I’ve always used the xprog and so have many other members here that do this...
Forum: E46 M3 (2001-2006) Wed, Feb-20-2019, 04:17:19 AM
Replies: 18
Views: 808
Posted By NZ_M3
Re: 2019 INPA E46 M3 SMG Software/Seller?

I would never use INPA’s full adaptation function for the smg it doesn’t work correctly.

I wrote the following for a forum member so I’ll just cut and paste here perhaps it will help future...
Forum: Coding and Tuning Sat, Feb-16-2019, 03:42:24 AM
Replies: 54
Views: 3,584
Posted By NZ_M3
Re: XDFproject BDMblock remake??

I don’t see why not the hardware is the same
Forum: Coding and Tuning Fri, Feb-15-2019, 11:20:28 PM
Replies: 54
Views: 3,584
Posted By NZ_M3
Re: XDFproject BDMblock remake??

Awesome!!!!! Shouldn’t be far away that board!!
Forum: Coding and Tuning Thu, Feb-14-2019, 01:51:09 AM
Replies: 54
Views: 3,584
Posted By NZ_M3
Re: XDFproject BDMblock remake??

Or to put it into layman’s terms, it’s like opening up a mss54 bin file but without the xdf to know what the hell it all means.
Forum: E46 M3 (2001-2006) Sun, Feb-03-2019, 09:52:20 PM
Replies: 4
Views: 221
Posted By NZ_M3
Re: Smg adaptations, help?????

Gear position sensor - change it
Forum: Coding and Tuning Fri, Feb-01-2019, 08:25:47 PM
Replies: 10
Views: 531
Posted By NZ_M3
Re: OBD Cable Needs to be Set to COM-1 but is on COM-4

Easier to just find the obd.ini file and change OBD=com4
Forum: Coding and Tuning Thu, Jan-31-2019, 05:13:17 AM
Replies: 54
Views: 3,584
Posted By NZ_M3
Re: XDFproject BDMblock remake??

Alright, ready to ship!
http://i115.photobucket.com/albums/n319/M3_Power/910BB6FA-3D34-4E9E-BB2C-783E6F924919_zpsceb66rvj.jpg

By doing bulk production the board itself comes to usd$2.00 each
The...
Forum: E46 M3 (2001-2006) Tue, Jan-29-2019, 08:06:58 PM
Replies: 97
Views: 8,479
Posted By NZ_M3
Re: End to all speculation: The CSL Kingpin

Herr’s a good source for the kingpins if anyone is struggling to find them.

https://www.apmotorsport.co.uk/product-page/m3-csl-kingpin-set

£375 plus shipping I am told for a set (VAT excl when...
Forum: E46 M3 (2001-2006) Sat, Jan-26-2019, 01:17:27 PM
Replies: 11
Views: 307
Posted By NZ_M3
Re: Need assistance with part number of this item

If it’s the left rear that makes no sense. Almost seems like the piece in there isn’t the correct part to begin with?

Because that part immediately after the V brace plastic part is this one:
...
Forum: Parts for Sale/Wanted Sat, Jan-26-2019, 12:50:00 AM
Replies: 20
Views: 1,406
Posted By NZ_M3
Re: CSL interior for sale

Not that set, that’s still owned by me and it is in better condition than this one.

This set came out of this - a bmwnz driver training car written off by a mechanic on a joyride
...
Forum: E46 M3 (2001-2006) Sat, Jan-19-2019, 08:09:13 PM
Replies: 17
Views: 522
Posted By NZ_M3
Re: Metal impeller water pump

GPM makes the s54 waterpump which you can only source from BMW

The GPM marking is very clear on the s54 waterpump
Forum: E46 M3 (2001-2006) Thu, Jan-17-2019, 08:31:13 PM
Replies: 21
Views: 1,034
Posted By NZ_M3
Re: How many have converted to the Radium/Walbro fuel pump kit

My setup

Not sure why you would buy a radium kit when there’s already one on the old pump housing
...
Forum: Coding and Tuning Wed, Jan-16-2019, 10:49:03 PM
Replies: 54
Views: 3,584
Posted By NZ_M3
Re: XDFproject BDMblock remake??

Found a better and cheaper source to produce the board tested and the quality of the boards are much better than the first prototype lot. Have placed a quantity order to make it economical for...
Forum: Coding and Tuning Fri, Jan-11-2019, 05:22:05 AM
Replies: 54
Views: 3,584
Posted By NZ_M3
Re: XDFproject BDMblock remake??

Tested full functionality and it works as expected!

Both read and flash work perfectly!

Let me work out the cost per board plus Tap’s royalty and let you guys know how much. It should work out...
Forum: Coding and Tuning Fri, Jan-11-2019, 04:36:07 AM
Replies: 54
Views: 3,584
Posted By NZ_M3
Re: XDFproject BDMblock remake??

Tested appears to work perfectly!!! I havent had time to do a flash test but should be good to go!!
...
Forum: Coding and Tuning Thu, Jan-10-2019, 07:44:27 PM
Replies: 54
Views: 3,584
Posted By NZ_M3
Re: XDFproject BDMblock remake??

Here it is!! Will test tonight and report back. Ready to go!

http://i115.photobucket.com/albums/n319/M3_Power/212E68A7-053C-4BAF-9289-CA36A8E24875_zpsmvntqnqe.jpg
Forum: Coding and Tuning Thu, Jan-10-2019, 07:05:30 PM
Replies: 11
Views: 882
Posted By NZ_M3
Re: MSS52 S62 EWS Delete Issues

Immoboliser is a two step process.

There are two sets of codes that need to match between key and ews unit a fixed code and a rolling code, once that is matched the ews releases the relay for...
Forum: E46 M3 (2001-2006) Thu, Jan-10-2019, 07:58:08 AM
Replies: 9
Views: 595
Posted By NZ_M3
The car that broke the rules - PTG M3 before the M3 GTR

Not sure if this as ever been posted before, but came across these today and thought it was rather good read with excellent high resolution photos.

Before the mighty M3 GTR ...

Apologies if it...
Forum: E46 M3 (2001-2006) Wed, Jan-09-2019, 10:02:15 PM
Replies: 4
Views: 417
Posted By NZ_M3
Wilwood brake kit - 140-14978

https://www.wilwood.com/BrakeKits/BrakeKitsProdFront?itemno=140-14978

Anyone have any experience with the latest Wilwood brake kit for our cars???

It uses their latest 6 piston kit and appears...
Forum: Coding and Tuning Sat, Jan-05-2019, 12:33:49 AM
Replies: 54
Views: 3,584
Posted By NZ_M3
Re: XDFproject BDMblock remake??

That’s so odd I’ve had nothing like what you described with bdm. In fact if I charged $10 each time I fixed someone’s dme because mssflasher or similar obd flashing tool broke a mss54 it’d have paid...
Forum: E46 M3 (2001-2006) Thu, Jan-03-2019, 03:44:07 AM
Replies: 4
Views: 161
Posted By NZ_M3
Re: DIS/GT1 Experts Chime in: Need help with SMG adaptations

Show me a screenshot

You might need to run the emulated diagnostic head in that case.
There has been so many versions of these now and not all are setup correctly.
Forum: Coding and Tuning Thu, Jan-03-2019, 01:06:16 AM
Replies: 19
Views: 1,073
Posted By NZ_M3
Re: INPA Question

As stated anything beyond inpa 3.01 loses functions relative to the e46 chassis

You want inpa 3.01 and ediabas 6.4.3 for the fullest function related to the e46 anything else is just pointless,...
Forum: E46 M3 (2001-2006) Thu, Jan-03-2019, 12:24:43 AM
Replies: 4
Views: 161
Posted By NZ_M3
Re: DIS/GT1 Experts Chime in: Need help with SMG adaptations

Easydis by ken fister doesn’t light up those indicators as it uses a built in diagnostic communicator.

Is the main screen an E30?
Forum: Coding and Tuning Thu, Jan-03-2019, 12:22:38 AM
Replies: 19
Views: 1,073
Posted By NZ_M3
Re: INPA Question

Utterly pointless hunting for so called latest version

All you need for the e46 plateform is INPA 3.01 which is in English.

BMW stopped supporting the e46 software from circa 2006 and later...
Forum: E46 M3 (2001-2006) Sat, Dec-29-2018, 06:59:31 PM
Replies: 46
Views: 1,470
Posted By NZ_M3
Re: Karbonius Air Flow Data

They did, they just didn’t publish the numbers. And I can tell you Terra is right. There is little discernable differences between the two trumpet design. The gain was seen above 8mm lift and around...
Forum: Coding and Tuning Wed, Dec-26-2018, 07:15:31 PM
Replies: 54
Views: 3,584
Posted By NZ_M3
Re: XDFproject BDMblock remake??

Well it seems the consensus is to have this redone so I will get reproductions done. I actually have a prototype already ordered so once the holiday period finishes here it will be reproduced and I...
Forum: Coding and Tuning Sun, Dec-23-2018, 09:09:04 PM
Replies: 8
Views: 463
Posted By NZ_M3
Re: MSS54HP preserve EWS

Yes or just do it on the hex editor before you flash it on
Forum: Coding and Tuning Sun, Dec-23-2018, 08:40:41 PM
Replies: 54
Views: 3,584
Posted By NZ_M3
XDFproject BDMblock remake??

So I have been trying to get hold of Tap and as many know he has sort of disappeared. The last time I managed to get hold of him was in April 2017 I think.

I feel the community still need a back...
Forum: Coding and Tuning Sun, Dec-23-2018, 08:31:48 PM
Replies: 8
Views: 463
Posted By NZ_M3
Re: MSS54HP preserve EWS

Yes all those files have no ews info with generic vin number only which you can modify to suit otherwise it’ll just read WBSBL11345AB12345 from memory
Forum: E46 M3 (2001-2006) Fri, Dec-07-2018, 09:21:09 PM
Replies: 97
Views: 8,479
Posted By NZ_M3
Re: End to all speculation: The CSL Kingpin

Ok I did exactly what Volke did but with a stock knuckle straight after a csl knuckle and i actually went and got a digital angle reader and I now concur with him there is indeed a 1 degree...
Forum: E46 M3 (2001-2006) Wed, Nov-28-2018, 07:29:57 PM
Replies: 98
Views: 5,795
Posted By NZ_M3
Re: No gas pedal after CSL Airboxes conversion. EML light.

Try reflash a new full file ... via bdm preferably. This is exactly what I went through it all sounds so familiar! We were chasing our tails regarding the throttle actuators for two days over nothing.
Forum: E46 M3 (2001-2006) Wed, Nov-28-2018, 01:43:26 AM
Replies: 98
Views: 5,795
Posted By NZ_M3
Forum: E46 M3 (2001-2006) Tue, Nov-27-2018, 07:53:56 PM
Replies: 98
Views: 5,795
Posted By NZ_M3
Re: No gas pedal after CSL Airboxes conversion. EML light.

I actually came across this exact issue by accident a few month back doing a conversion for a guy.

Turns out you can’t flash different 0401 data section onto any CSL firmware version. I forgot I...
Forum: Coding and Tuning Sun, Nov-25-2018, 08:15:33 PM
Replies: 16
Views: 1,587
Posted By NZ_M3
Re: Is the R270+ still the best option for virginizing clusters

http://www.m3forum.net/m3forum/showthread.php?t=508631

You need to basically soak the pins in flux to so this never use a sucker. It’s not hard to reflow the pins on that big chip if you screw up...
Forum: E46 M3 (2001-2006) Sat, Nov-24-2018, 08:54:58 PM
Replies: 79
Views: 3,636
Posted By NZ_M3
Re: Is Epic’s Alpha N “close enough” to MAP setup w/ carbon airbox?

Yes still have the terrible production airbox with wonky stickers, upside down tabs and bubbles throughout the weave to name but a few! I had to give one back to be destroyed but they gave me the...
Forum: E46 M3 (2001-2006) Sat, Nov-24-2018, 08:06:58 PM
Replies: 79
Views: 3,636
Posted By NZ_M3
Re: Is Epic’s Alpha N “close enough” to MAP setup w/ carbon airbox?

Correct a guy that knows his airboxes :thumbsup2:
Left is original CSL equiped Airbox (ones that came with the car) bottom is the current generation Wethje airbox with their new stickers and BMW M...
Forum: E46 M3 (2001-2006) Sat, Nov-24-2018, 03:50:17 AM
Replies: 79
Views: 3,636
Posted By NZ_M3
Re: Is Epic’s Alpha N “close enough” to MAP setup w/ carbon airbox?

For me personally the worst thing about the Evolve airbox is you are stuck with using their air filter only and no one else. Contrast that with the other airboxes that utilise the CSL BMC filter you...
Forum: E46 M3 (2001-2006) Thu, Nov-22-2018, 09:23:55 PM
Replies: 147
Views: 96,953
Posted By NZ_M3
Re: Comprehensive CSL Intake Thread

$30 more and it didn’t come with the sticker? Conned!! Lol!

https://encrypted-tbn0.gstatic.com/images?q=tbn%3AANd9GcSE0THmFjVHFy951Aj6Wd7j65nY2zzViNAC_8d92r0g0e14vNvg
Forum: E46 M3 (2001-2006) Thu, Nov-22-2018, 08:04:32 PM
Replies: 16
Views: 689
Posted By NZ_M3
Re: E46 M3 stock airbox tech

The pickup from the kidney grill isn’t pointed forward of the airflow either.

I fail to understand your notion that it’s a balanced pipe to stop air from stalling. Put a baloon over the pipe and...
Forum: E46 M3 (2001-2006) Thu, Nov-22-2018, 02:49:53 AM
Replies: 16
Views: 689
Posted By NZ_M3
Re: E46 M3 stock airbox tech

Two inlets one from front kidney grill and the other from the left side fog light both lead into the airbox before the filter and Maf
Forum: Coding and Tuning Mon, Nov-19-2018, 11:06:32 PM
Replies: 134
Views: 42,132
Posted By NZ_M3
Re: Converting an MSS54HP into an MSS54HP CSL (H-bridge)

Tested the Bosch 30348 and it works perfectly without issues

https://farm5.staticflickr.com/4885/45050198495_6b5ba06251_z.jpg
Forum: E46 M3 (2001-2006) Mon, Nov-19-2018, 01:01:48 AM
Replies: 1,586
Views: 133,497
Posted By NZ_M3
Re: Streamline & Dr M3an M3's CSL Airbox Development Journal Collaboration

I’ve seen some Karbonius flow bench testing numbers from Germany on a new airbox design of theirs with headwork and it’s 295 cfm intake side which is a rise from the stock 253 cfm ... very impressive...
Forum: E46 M3 (2001-2006) Sun, Nov-18-2018, 07:27:31 PM
Replies: 1,586
Views: 133,497
Posted By NZ_M3
Re: Streamline & Dr M3an M3's CSL Airbox Development Journal Collaboration

I’ve personally stood on top of a Geoff Steel Racing airbox without it breaking and that thing is as stiff as a rock for all the wrong reasons.

Antony eluded to the weight of the box being in the...
Forum: E46 M3 (2001-2006) Sun, Nov-18-2018, 03:15:27 AM
Replies: 1,586
Views: 133,497
Posted By NZ_M3
Re: Streamline & Dr M3an M3's CSL Airbox Development Journal Collaboration

Nope I would take it just like you but I would state out right in the beginning of any review that this was provided to me free of charge because of a continual loyalty and support for Streamline and...
Forum: E46 M3 (2001-2006) Sat, Nov-17-2018, 08:29:22 PM
Replies: 1,586
Views: 133,497
Posted By NZ_M3
Re: Streamline & Dr M3an M3's CSL Airbox Development Journal Collaboration

I am just curious did you have to pay for this airbox or was it just sent to you for free?
Forum: Coding and Tuning Mon, Nov-05-2018, 05:12:33 AM
Replies: 134
Views: 42,132
Posted By NZ_M3
Re: Converting an MSS54HP into an MSS54HP CSL (H-bridge)

Has anyone tried the Bosch 30348??

It is suppose to be a replacement for the Freescale
Forum: E46 M3 (2001-2006) Thu, Nov-01-2018, 06:14:37 AM
Replies: 97
Views: 8,479
Posted By NZ_M3
Re: End to all speculation: The CSL Kingpin

Wait aren’t you saying the angle change was in “the angle of the hole with respect to the wheel bearing spindle“?? Or are you saying the whole kingpin has been machine at an incremental angle change...
Forum: E46 M3 (2001-2006) Thu, Nov-01-2018, 01:22:49 AM
Replies: 97
Views: 8,479
Posted By NZ_M3
Re: End to all speculation: The CSL Kingpin

I put an actual csl shock body through the hole and took the measurement from that with the hub bolted statically to a piece of wood on the floor through the LCA and tie rod holes.

Both set of...
Forum: E46 M3 (2001-2006) Thu, Nov-01-2018, 12:22:40 AM
Replies: 97
Views: 8,479
Posted By NZ_M3
Re: End to all speculation: The CSL Kingpin

I am fairly certain that camber difference is from lowering front ride height. The shocks and springs are completely different length between the csl and the stock M3

I too have measured it and do...
Forum: E46 M3 (2001-2006) Wed, Oct-31-2018, 06:58:45 AM
Replies: 97
Views: 8,479
Posted By NZ_M3
Re: End to all speculation: The CSL Kingpin

That’s exactly what I was trying to illustrate in the photos the angle of the hole relative to the bearing spindle is identical. If it was as you stated it wouldn’t be the same without showing up...
Forum: E46 M3 (2001-2006) Tue, Oct-30-2018, 10:38:52 PM
Replies: 97
Views: 8,479
Posted By NZ_M3
Re: End to all speculation: The CSL Kingpin

I've measured mine over and over again and compared it to a stock E46 M3 knuckle and there is NO 1 degree extra camber at all which you would see from moving the bottom shock hole ... In fact this...
Forum: E46 M3 (2001-2006) Wed, Oct-24-2018, 08:17:41 PM
Replies: 147
Views: 96,953
Posted By NZ_M3
Re: Comprehensive CSL Intake Thread

Ah yes that’s not the worst one for CSL tax however when it came to “modified” stock parts ... that honor belongs to the seat tilting lever on the CSL recaro seats - a cut down version of the stock...
Forum: E46 M3 (2001-2006) Wed, Oct-24-2018, 01:10:34 AM
Replies: 147
Views: 96,953
Posted By NZ_M3
Re: Comprehensive CSL Intake Thread

Definitely a cut down piece with CSL tax added ... you can even see the cheap saw they must have used judging by the saw marks. Save yourself some money and use a saw and just cut it.
Forum: Coding and Tuning Mon, Oct-08-2018, 11:01:52 PM
Replies: 134
Views: 42,132
Posted By NZ_M3
Re: Converting an MSS54HP into an MSS54HP CSL (H-bridge)

Couldn’t one theoratically substitute soldering with silver paste instead of solder under the chip for heatsink??
Forum: E46 M3 (2001-2006) Wed, Sep-19-2018, 10:47:10 PM
Replies: 12
Views: 540
Posted By NZ_M3
Re: CSL front sway bar (hollow) wall thickness

I have one sitting in my room if you need measurements and weight ect let me know.

Might think about cutting it open if I can grab a second one somewhere : P
Forum: E46 M3 (2001-2006) Tue, Sep-18-2018, 08:46:47 PM
Replies: 3
Views: 263
Posted By NZ_M3
Re: Is gt1 the only software that can run a vanos test?

What’s wrong with your Gt1? Is it a genuine unit? If so I can repair those.
Forum: E46 M3 (2001-2006) Thu, Sep-13-2018, 09:23:46 PM
Replies: 11
Views: 729
Posted By NZ_M3
Re: OEM CSL Airbox "BMW MPower" Logo/Sticker Placement

As stated in the other thread, I have the technical drawings for the airbox which show the exact placement of the logo decal. Unfortunately I can't post this as it is copyrighted and BMW are known to...
Forum: Parts for Sale/Wanted Thu, Sep-13-2018, 08:09:16 PM
Replies: 599
Views: 80,416
Posted By NZ_M3
Re: Group buy: Karbonius CSL Airbox - Up to 14% off

I have the technical drawing of the mainbox showing exactly where the lettering goes - so if you start a dedicated thread I think it will satisfy all those of us with OCD by showing a photo of a real...
Forum: E46 M3 (2001-2006) Thu, Sep-13-2018, 06:39:59 AM
Replies: 68
Views: 7,445
Posted By NZ_M3
Re: Streamline CSL/R airbox review - ongoing

First 3 customer airboxes are suppose to be finished by the end of this month.
Forum: E46 M3 (2001-2006) Tue, Sep-11-2018, 10:22:26 PM
Replies: 31
Views: 1,145
Posted By NZ_M3
Re: CSL Carbon Fiber Weaves

Not really, if BMW made these parts out of fiberglass and covered it with a layer of carbon weave you’d be pissed if they called it a carbon fibre product.

Similarly if the bootlid had a single...
Forum: E46 M3 (2001-2006) Tue, Sep-11-2018, 07:07:01 AM
Replies: 31
Views: 1,145
Posted By NZ_M3
Re: CSL Carbon Fiber Weaves

You guys are actually all wrong

Door cards, diffuser and bumper splitters are all 2x2 twill construction with a thin external “cosmetic” 1x1 weave finish. Sand too much to repaint and you’ll go...
Forum: Coding and Tuning Mon, Sep-03-2018, 08:26:29 PM
Replies: 3
Views: 534
Posted By NZ_M3
Re: Change or update E46 M3 IKE Coding Index?

Don’t do that you will stop the cluster from functioning or function oddly depending on the coding index it is - some are interchageable some are not. The firmware isn’t on the eeprom it is on...
Forum: E46 M3 (2001-2006) Wed, Aug-29-2018, 08:36:21 AM
Replies: 146
Views: 8,706
Posted By NZ_M3
Re: Streamline CSL bumper install experience and design thoughts

Ha!!!

Sorry Ian, I hold different opinion about Leighton after this bumper episode.
Forum: E46 M3 (2001-2006) Mon, Aug-06-2018, 03:17:52 AM
Replies: 39
Views: 1,839
Posted By NZ_M3
Re: Do Stiff spring rates have correlation to subframe cracks?

Empirical evidence suggests stiffer = less likely to suffer failure

Evidence

- CSLs while still show failures many are driven very hard and the failures show up later in life.

- E46 WTCC...
Forum: Coding and Tuning Sat, Aug-04-2018, 12:25:01 PM
Replies: 5
Views: 711
Posted By NZ_M3
Re: Sync of mss54hp and ews on bench?

I have ring antenna, key fob and General module all linked.
Forum: E46 M3 (2001-2006) Sat, Aug-04-2018, 04:25:12 AM
Replies: 216
Views: 14,218
Posted By NZ_M3
Re: Review: Cobra Nogaro seats (uniquely street friendly fixed back bucket seat)

These adaptors on OE manual seat runner mounted with the csl bucket seat shell give fairly similar rear access when compared to the stock OE CSL tilting seat mechanism
...
Forum: Parts for Sale/Wanted Sun, Jun-24-2018, 04:08:28 AM
Replies: 948
Views: 111,805
Posted By NZ_M3
Re: CSL Front Bumper Group-Buy

Nope not even close.

As stated it has not been mentioned before and it’s not an adjustment that many know about but it is one essential to ensure correct alignment.
Forum: Parts for Sale/Wanted Sun, Jun-24-2018, 12:08:33 AM
Replies: 948
Views: 111,805
Posted By NZ_M3
Re: CSL Front Bumper Group-Buy

Not sure what you mean. I have and I have never seen it mentioned before.

People assume the adjustment is in the white plastic brackets itself only but it is not. The actual metal guards adjust...
Forum: Parts for Sale/Wanted Sat, Jun-23-2018, 06:31:52 AM
Replies: 948
Views: 111,805
Posted By NZ_M3
Re: CSL Front Bumper Group-Buy

Hmmmm do people realise that you can actually move the guards outwards as an adjustment?? Not all the adjustment is in the bumper itself?

With that white car it seems to me the right hand guard...
Forum: E46 M3 (2001-2006) Fri, Jun-22-2018, 09:35:46 PM
Replies: 373
Views: 27,154
Posted By NZ_M3
Re: CSL OE Bumper Carbon Fiber bits

Can’t say I didn’t warn you! I did say being in Canada was going to be a deal breaker for a lot people when it came to shipping. It’s like Canada doesn’t actually enjoy selling to the outside world....
Forum: E46 M3 (2001-2006) Mon, Jun-11-2018, 03:11:54 AM
Replies: 68
Views: 7,445
Posted By NZ_M3
Re: Streamline CSL/R airbox review - ongoing

I’ll set the record straight - there was no pressure to do this for Streamline at all. They emailed an offer in exchange for a review. No pressure to buy, no sales pitch, no please do this for us we...
Forum: E46 M3 (2001-2006) Sun, Jun-10-2018, 07:10:42 AM
Replies: 68
Views: 7,445
Posted By NZ_M3
Re: Streamline CSL/R airbox review - ongoing

To the skeptic we simply won’t know for sure - and neither will I,, but at the same time I am probably not going to be the only person that will review this airbox.

I get the feeling that there...
Forum: E46 M3 (2001-2006) Sat, Jun-09-2018, 05:31:57 AM
Replies: 68
Views: 7,445
Posted By NZ_M3
Re: Streamline CSL/R airbox review - ongoing

Both fair comments and I guess by me documenting it and having good photos up for every important detail (including fitment ect) it can be seen as a goto reference for future purchases. It can be the...
Showing results 1 to 100 of 819

 
Forum Jump


All times are GMT. The time now is 04:57:32 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
M3Forum.com and M3forum.net is in no way sponsored, endorsed or affiliated by or with BMW NA / BMW AG or any of it's subsidiaries or vendors.
BMW and M3 (E90 M3 | E92 M3 | E93 M3 | E46 M3 | E36 M3 | E30 M3) are registered trademarks of BMW AG.
M3Forum Terms of Service
Copyright ©1999-2017 M3Forum.com
BMW M3 owners and enthusiasts with BMW M3 Forums, M3 Photos, M3 Reviews, and more! Get the latest BMW M3 discussions and news.