BMW M3 Forum
BMW M3 Forum BMW M3 Gallery BMW M3 Reviews BMW M3 Social Groups BMW M3 Chat M3Forum Sponsors >>
Loading


Mobile M3forum
Go Back   BMW M3 Forum.com (E30 M3 | E36 M3 | E46 M3 | E92 M3 | F80/X) > Search Forums
Tire Rack Buy Winter Tires Now!
Not a member? Register Now!
Register Gallery All Albums Garage Search Today's Posts Mark Forums Read Calendar FAQ


Showing results 1 to 100 of 1541
Search took 0.08 seconds.
Search: Posts Made By: aeronaut
Forum: M3 Track: Racing and DE Mon, Aug-13-2018, 02:15:44 PM
Replies: 15
Views: 350
Posted By aeronaut
Re: Tracking with 996 Brembo setup

On E36, my experience (3 years running)....

- I machined the calipers so I'm using standard E46 M3 rotors. Consumable wear was reduced by quite a bit, I'd guess at least 30% or more. I run the...
Forum: M3 Track: Racing and DE Tue, Jul-10-2018, 11:39:24 AM
Replies: 9
Views: 684
Posted By aeronaut
Re: Lets chat Rear swaybar...

Yep, the higher the spring rates, the bigger your bars need to be to make a difference.
And yep, spring rates have to be pretty spot on before you can use bars to fine tune. And bars are for fine...
Forum: M3 Track: Racing and DE Thu, Jul-05-2018, 10:53:02 PM
Replies: 9
Views: 619
Posted By aeronaut
Re: Anyone have any experience with Element Fire Extinguishers? Pretty different!

I'm seeing 2 downsides:
- Gotta get awfully close to that fire. THIS close. OUCH. I wouldn't use that thing on any fire that could flare.

https://i.imgur.com/L4D7DaJ.png

- In the vid, it...
Forum: E36 / E30 - Parts for Sale/Wanted Thu, Jul-05-2018, 01:06:15 AM
Replies: 0
Views: 227
Posted By aeronaut
TCKline E36 behive rear springs, 500lb

$110 for both, shipped anywhere in US.
Barely used, less than 500 mi on them.

https://imgur.com/YTEBWsp
Forum: M3 Track: Racing and DE Sun, Jul-01-2018, 01:17:54 AM
Replies: 10
Views: 963
Posted By aeronaut
Re: Time for new pads, anything else I should try?

The Hawk 60s and 70s wear rotors much faster than the PFC08s, and don't last as long.
The ST47s have better initial bite than the PFC08s but are a bit harder to modulate on release.
Forum: M3 Track: Racing and DE Sun, Jul-01-2018, 12:55:04 AM
Replies: 4
Views: 548
Posted By aeronaut
Re: custom exhaust Q's

I was looking at Vibrant, and will definitely install resonator, so thanks.
Forum: M3 Track: Racing and DE Wed, Jun-27-2018, 10:39:05 PM
Replies: 4
Views: 548
Posted By aeronaut
Re: custom exhaust Q's

Excellent info, thanks. If I do anything, I'll at least get the BW merge section.
Forum: M3 Track: Racing and DE Tue, Jun-26-2018, 12:12:06 PM
Replies: 4
Views: 548
Posted By aeronaut
custom exhaust Q's

So, after fabbing up a simple exhaust for a friend's race car this last weekend, I'm back in the mood to fab up my own. For me it's all about weight savings, but still drive-able to/from track (not...
Forum: M3 Track: Racing and DE Tue, Jun-26-2018, 12:06:46 PM
Replies: 5
Views: 585
Posted By aeronaut
Re: Sparco Seat / Safety Sale

I gotta say, finding specific items on that web site is horrendous.
Forum: M3 Track: Racing and DE Wed, Jun-20-2018, 11:41:04 AM
Replies: 14
Views: 1,184
Posted By aeronaut
Re: BF Goodrich G-Force R1s are discontinued!!

Check the section width of the Toyo RR 275. May be no wider than the R1 265.

I've had no problem with delamination of the RR. Toyo has guidance on how to mount them (DOT label in or out), and...
Forum: M3 Track: Racing and DE Tue, May-22-2018, 03:19:10 PM
Replies: 29
Views: 1,202
Posted By aeronaut
Re: How often do you change your fluids?

Interesting. The person I was talking about was E36 S52, IIRC.

My last oil analysis and records show 5200 mi and 40, 20 min sessions, so about 10 track day equivalent. No issues. E36 S50 that...
Forum: M3 Track: Racing and DE Tue, May-22-2018, 02:48:15 PM
Replies: 29
Views: 1,202
Posted By aeronaut
Re: How often do you change your fluids?

There was someone on here a few years ago, a track junkie, that did something like 10k mi and 20 or so track days on 1 oil change. Blackstone came back clear, with recommendation to extend oil change...
Forum: M3 Track: Racing and DE Thu, May-10-2018, 12:44:52 AM
Replies: 7
Views: 461
Posted By aeronaut
Re: Brake Judder

I've had terrible judder a few times, in order of the problems for me:

- Bad FCABs. And absolutely no sign they were bad from static inspection.
- Bad rotor. It was well within spec for flatness....
Forum: M3 Track: Racing and DE Tue, May-01-2018, 09:02:16 PM
Replies: 49
Views: 3,355
Posted By aeronaut
Forum: M3 Track: Racing and DE Mon, Apr-30-2018, 10:03:27 PM
Replies: 28
Views: 1,277
Posted By aeronaut
Re: Wheel Stud Life Span?

I got about 60 track days on mine, and broke one only when I over torqued it about 25%, so I think they were getting weekish. A few were very slightly bent. If I don't overtorque, I'll inspect every...
Forum: M3 Track: Racing and DE Mon, Apr-30-2018, 09:59:35 PM
Replies: 49
Views: 3,355
Posted By aeronaut
Re: Power Steering Delete!

E36 correct? Just wondering which belt to buy to bypass the PS Pump on an E36.
Forum: M3 Track: Racing and DE Mon, Apr-30-2018, 06:59:05 PM
Replies: 49
Views: 3,355
Posted By aeronaut
Forum: M3 Track: Racing and DE Thu, Apr-19-2018, 02:04:38 AM
Replies: 31
Views: 2,438
Posted By aeronaut
Re: Right seat instructing - would you do it?

For the record and for other readers; That is not the norm, should be no ones goal, should always be considered serious if happening frequently, and incorrectly implies it's ok and common for an...
Forum: M3 Track: Racing and DE Wed, Apr-18-2018, 03:35:33 PM
Replies: 31
Views: 2,438
Posted By aeronaut
Re: Right seat instructing - would you do it?

Well, it really depends on the student. But, it starts with the initial conversation. Everything from telling them their car is nice, to asking who's with them that day and if their family is there,...
Forum: M3 Track: Racing and DE Wed, Apr-18-2018, 12:22:38 PM
Replies: 31
Views: 2,438
Posted By aeronaut
Re: Right seat instructing - would you do it?

Wow, I can get my chatterbox and headsets to last around 1 season (~25 days of instruction).

All good comments on instructing. Todays cars are fast and sticky, creating a VERY short time between...
Forum: M3 Track: Racing and DE Tue, Apr-17-2018, 12:26:42 AM
Replies: 24
Views: 1,525
Posted By aeronaut
Re: Engine blew up. Replacement options?

Commen sense says look here. "...Rod bearings were updated right before this event ..."
Forum: E36 M3 (1992-1999) Tue, Mar-20-2018, 01:01:03 PM
Replies: 49
Views: 2,559
Posted By aeronaut
Re: Need suspension input (yes another one)

Koni yellows and a set of HR OE springs (for example) provide a very nice upgrade over stock, lower the car as low as it needs to go, and are at a good price point compared to the better C/O's, and...
Forum: M3 Track: Racing and DE Tue, Mar-20-2018, 12:37:49 PM
Replies: 26
Views: 1,249
Posted By aeronaut
Re: 6-point Schroth Quick Fit Pro on stock seats?

Um. That's called advertising.
Forum: M3 Track: Racing and DE Tue, Mar-20-2018, 11:39:19 AM
Replies: 26
Views: 1,249
Posted By aeronaut
Forum: M3 Track: Racing and DE Tue, Mar-20-2018, 11:26:59 AM
Replies: 26
Views: 1,249
Posted By aeronaut
Re: 6-point Schroth Quick Fit Pro on stock seats?

That's actually common. More often than not, a company designes and builds to a government standard/spec, but is never 'approved' by the Gov.

As far as Schroth, this statement (the one posted by...
Forum: M3 Track: Racing and DE Mon, Mar-19-2018, 10:59:52 PM
Replies: 26
Views: 1,249
Posted By aeronaut
Re: 6-point Schroth Quick Fit Pro on stock seats?

I had tried to find that but couldn't!!
But to be clear, as far as an insurance company is concerned, they are not "DOT approved". Schroth states they are built to DOT standards. And I do trust...
Forum: M3 Track: Racing and DE Mon, Mar-19-2018, 08:23:06 PM
Replies: 26
Views: 1,249
Posted By aeronaut
Re: 6-point Schroth Quick Fit Pro on stock seats?

FYI, I do not believe the QFP harnesses are "DOT approved". Schroth simply states 'they are designed to be used in stock seats' and with the OEM seat belt receptacles and detection devices.
I'd...
Forum: M3 Track: Racing and DE Mon, Mar-19-2018, 01:55:03 PM
Replies: 9
Views: 623
Posted By aeronaut
Re: NT01s in 30-40F Weather

They'll be fine. I've run NT01s and Toyo RR's in early morning 28 degreeish weather. And was surprised how much grip they had. Make sure and do a few warm up laps, and watch your tire temps over the...
Forum: M3 Track: Racing and DE Sat, Mar-17-2018, 04:12:15 PM
Replies: 17
Views: 1,079
Posted By aeronaut
Re: Laptimer

I've used both Harry's and AiM Solo. The data analysis for the AiM Solo is much much more flexible and informative than Harry's. I also had problems with Harry's just screwing up at the worst times....
Forum: M3 Track: Racing and DE Fri, Mar-09-2018, 02:20:55 PM
Replies: 7
Views: 550
Posted By aeronaut
Re: What would you do? - E36 vs E30

IMO, it's often the ride height and spring rates that cause this. not knowing how your M3 is currently setup... Get the ride height reasonable, and use "long and soft" springs (350/450 or such). More...
Forum: M3 Track: Racing and DE Thu, Mar-08-2018, 12:14:12 AM
Replies: 10
Views: 768
Posted By aeronaut
Re: E36 M3 Chassis Reinforcement (Rear Trailing Arms)

I love it when the market sets the price!
Now $700!! LOL
Forum: M3 Track: Racing and DE Wed, Mar-07-2018, 12:50:37 AM
Replies: 10
Views: 768
Posted By aeronaut
Re: E36 M3 Chassis Reinforcement (Rear Trailing Arms)

The prep is a PIA. Thick nasty factory undercoating in and around the pocket.

The welding isn't tough (rarely is with anything steel). The main point is to get those welds around the bungs...
Forum: M3 Track: Racing and DE Sun, Mar-04-2018, 08:40:36 PM
Replies: 16
Views: 1,133
Posted By aeronaut
Re: People running PFC08 pads...

I don't, but I've got a close friend that just leveraged the FCP Euro warranty for his track cars rotors. All went well.
Forum: M3 Track: Racing and DE Mon, Feb-26-2018, 10:26:09 PM
Replies: 82
Views: 15,078
Posted By aeronaut
Re: Order of operations for DE car upgrades

The MPSS is a fine beginner HPDE tire. Quick, forgiving, and wears well.
Just to be very clear, any tire of MPSS capability or more, will NOT be your limiting factor for several/many days of HPDE. ...
Forum: M3 Track: Racing and DE Mon, Feb-26-2018, 09:56:41 PM
Replies: 82
Views: 15,078
Posted By aeronaut
Re: Order of operations for DE car upgrades

What's on there now, and are they less than 1/2 worn?
If you're just starting, your 1st few days of HPDE won't much care what tire you have. Any decent name brandish summer tire that meets the speed...
Forum: M3 Track: Racing and DE Sun, Feb-18-2018, 04:01:40 PM
Replies: 4
Views: 703
Posted By aeronaut
Re: Bendix Blank Rotor E92 M3 (street/track)

Yea, if the Bendix blanks fit, they'll be good and fine for track use. Many on here, including myself, buy the cheapest we can find. I've paid $30/ea for front rotors, all is good. They all micro-...
Forum: M3 Track: Racing and DE Sat, Jan-13-2018, 02:26:16 PM
Replies: 4
Views: 551
Posted By aeronaut
Re: Thoughts on this tire wear?

^ Yep! I usually flip mine once also.
Forum: M3 Track: Racing and DE Sat, Jan-13-2018, 12:42:27 PM
Replies: 4
Views: 551
Posted By aeronaut
Re: Thoughts on this tire wear?

Looks pretty decent to me for 25 hc's. In other words, from just these pics, I wouldn't chase camber settings.

I'd get tire temperatures and/or think about what handling characteristics I'd want...
Forum: M3 Track: Racing and DE Thu, Nov-09-2017, 02:36:15 PM
Replies: 20
Views: 1,617
Posted By aeronaut
Re: Radiator Roll Call

Mishimoto radiator and MM underpanel combo = couldn't install ducting properly without some custom work, so I never did. Ran hot (>225) on slow-speed high-rpm tracks on days at 90 deg or more, after...
Forum: E36 M3 (1992-1999) Mon, Oct-30-2017, 05:23:29 PM
Replies: 144
Views: 13,102
Posted By aeronaut
Forum: E36 M3 (1992-1999) Mon, Oct-30-2017, 04:55:05 PM
Replies: 144
Views: 13,102
Posted By aeronaut
Re: Are there any steering shaft extensions (cabin side) to get the wheel towards dri

Interested, for an E36. How would one go about checking fitment on an E36, and ordering? (Having to lengthen the wires would not be an issue for me.)
Forum: M3 Track: Racing and DE Wed, Oct-11-2017, 02:38:51 AM
Replies: 20
Views: 1,868
Posted By aeronaut
Re: auto crossing with motorcycle helmet

I agree, it doesn't seem too extreme. Streetish tires are key. Don't know what spring rates he's running. He's got some aero. With all respect to the previous owner of the car, I have no idea if the...
Forum: M3 Track: Racing and DE Tue, Oct-10-2017, 03:49:24 PM
Replies: 20
Views: 1,868
Posted By aeronaut
Re: auto crossing with motorcycle helmet

Bluntly, you need less mods, not more mods. As is, it'll be more difficult to learn good habits and car control with that car on track, compared to say a stock E46 or such. But the good news, it...
Forum: Cars for Sale/Wanted Tue, Oct-10-2017, 03:48:26 PM
Replies: 15
Views: 2,263
Posted By aeronaut
Forum: M3 Track: Racing and DE Tue, Oct-10-2017, 12:14:20 PM
Replies: 20
Views: 1,868
Posted By aeronaut
Re: auto crossing with motorcycle helmet

Very few, if any, helmets have both Snell and DOT certification sticker. Snell will tell you that all Snell helmets meet DOT requirements. I'm not sure.

I think recommending a 1st time track day...
Forum: M3 Track: Racing and DE Tue, Oct-10-2017, 10:36:51 AM
Replies: 20
Views: 1,868
Posted By aeronaut
Re: auto crossing with motorcycle helmet

Most track day organizations will be explicit about the minimum requirements for the helmet. Many allow Snell rated motorcycle helmets. Not sure if any allow DOT (only) helmets. For at least your 1st...
Forum: E36 M3 (1992-1999) Thu, Sep-28-2017, 10:02:01 PM
Replies: 28
Views: 1,913
Posted By aeronaut
Re: How high is too high with water temp on the track?

Just FYI, I had a Mishimoto rad, and a Motion Motorsports underpanel. The MM baffling would not fit properly with that combo. I never made any custom baffling. I saw about 225-230deg at an event a...
Forum: M3 Track: Racing and DE Wed, Sep-20-2017, 08:41:21 PM
Replies: 5
Views: 655
Posted By aeronaut
Re: Help Needed -> Doors wont lock

That's going to be nearly impossible to do via online forum. Bentley manual is probably your best bet.

That said, check you fuses?
Forum: M3 Track: Racing and DE Mon, Sep-18-2017, 08:28:06 PM
Replies: 8
Views: 567
Posted By aeronaut
Re: Rotor help?

I run the cheapest blanks I can find on RockAuto. I've bought rears for $11 each. Fronts, for $25. I've also tried 'expensive' Brembo's and others from Bimmerworld, Turner, and UUC.

I can't tell...
Forum: M3 Track: Racing and DE Thu, Aug-24-2017, 02:36:02 AM
Replies: 18
Views: 1,562
Posted By aeronaut
Re: Time for proper seats...

FYI, as a few have stated above, after sitting in a dozen different seats, there's NO WAY I'd buy a seat without sitting in it first. Pictures and descriptions simply don't matter.
Forum: E36 M3 (1992-1999) Tue, Aug-22-2017, 11:53:32 PM
Replies: 17
Views: 1,476
Posted By aeronaut
Forum: E36 M3 (1992-1999) Wed, Aug-09-2017, 08:29:35 PM
Replies: 144
Views: 13,102
Posted By aeronaut
Re: Are there any steering shaft extensions (cabin side) to get the wheel towards dri

Sorry, I've long since switched to a fixed bracket and aftermarket seat. PLENTY low now.
Forum: M3 Track: Racing and DE Fri, Jul-28-2017, 08:37:50 PM
Replies: 48
Views: 7,346
Posted By aeronaut
Re: Used slicks vs. Toyo RR's

The RR's kept grip well up to the end. Maybe 1/2sec slower the last 8 sessions or so? It's a bit apples and oranges because my ABS went out near the end of my RR's life, so lap times are a bit...
Forum: M3 Track: Racing and DE Thu, Jul-27-2017, 03:46:04 PM
Replies: 48
Views: 7,346
Posted By aeronaut
Re: Used slicks vs. Toyo RR's

I mostly agree with you. I switched (for now) to RR's because I wanted to try the E46 Spec tire. And it turns out, I get the same # heat cycles on RRs and on NT01's. I get an odd wear pattern when...
Forum: M3 Track: Racing and DE Wed, Jul-26-2017, 03:18:51 PM
Replies: 48
Views: 7,346
Posted By aeronaut
Re: Used slicks vs. Toyo RR's

Jeezzzz, I see zero reason to add 50% 'margin' as recommended by Tire Rack. That recommendation simply adds to their bottom line.
Forum: M3 Track: Racing and DE Wed, Jul-26-2017, 01:26:32 PM
Replies: 48
Views: 7,346
Posted By aeronaut
Re: Used slicks vs. Toyo RR's

The Toyo RR is my new goto for HPDE. 2 sets, no cracking, and pretty even wear by rotating as Toyo states. I got 34 sessions out of my first set, but I'd say 1/3 of those sessions were at 85% (due...
Forum: M3 Track: Racing and DE Tue, Jun-13-2017, 12:26:15 AM
Replies: 5
Views: 636
Posted By aeronaut
Re: Brake Pad Chip missing (photo)

^Ditto. That won't effect braking, but watch them for additional chipping. My bet is they'll be fine.
Forum: M3 Track: Racing and DE Thu, Jun-08-2017, 11:54:28 PM
Replies: 10
Views: 1,488
Posted By aeronaut
Re: Aero must be paired with slicks?

Running R-comps and/or serious aero will significantly INCREASE the time it takes to learn.
Forum: E36 M3 (1992-1999) Thu, Jun-08-2017, 02:28:41 PM
Replies: 144
Views: 13,102
Posted By aeronaut
Re: Are there any steering shaft extensions (cabin side) to get the wheel towards dri

There's a company, name starts with an "R", can't remeber, that at least as of a few years ago made custom OEM quality steering wheels WITH airbags for the E36. Don't know if they had any that moved...
Forum: E36 M3 (1992-1999) Fri, Jun-02-2017, 01:10:51 AM
Replies: 6
Views: 405
Posted By aeronaut
Re: Driver side rear tire's outer sidewall rubbing wheel well?

Check your spare, it just may be an 8.5".
Which 245 tires do you have installed? Some 245's are quite wide.
Forum: M3 Track: Racing and DE Wed, May-31-2017, 09:51:12 PM
Replies: 20
Views: 2,271
Posted By aeronaut
Re: Rear trailing arm failure

The real advantage of the plate comes from providing much more material for the bung holes to weld to. But yea, prep chassis surface, fill in welds around bung holes, stitch plate edges to chassis...
Forum: M3 Track: Racing and DE Wed, May-31-2017, 07:28:40 PM
Replies: 20
Views: 2,271
Posted By aeronaut
Re: Rear trailing arm failure

Naa...I easily cut mine for an E36 with a hand held grinder. On an E36, if you don't remove the fuel tank you need to cut about an inch off the end.
Forum: M3 Track: Racing and DE Wed, May-31-2017, 06:52:00 PM
Replies: 20
Views: 2,271
Posted By aeronaut
Re: Rear trailing arm failure

RealOEM shows the E36 and E46 RTA 'cup' as the same part #.
If true, this means the bung locations are the same.
This means that just maybe, a E36 reinforcement plate could be easily modified...
Forum: M3 Track: Racing and DE Sun, May-28-2017, 12:15:50 PM
Replies: 17
Views: 1,933
Posted By aeronaut
Re: Brake fail at first HPDE

ATE 200 is usually fine for HPDE, but doesn't have a great wet boiling point. When's the last time you fully flushed brakes?

From your description, I don't have a clue as to pads or fluid.
Forum: M3 Track: Racing and DE Tue, May-23-2017, 05:37:28 PM
Replies: 12
Views: 1,461
Posted By aeronaut
Re: More power from track car

IMO, this. I had a blast last weekend chasing down a C5 corvette, and (just barely) keeping up with a GT350 mustang. I'll give up that it was a technical track with a top speed (for me) of around...
Forum: E36 M3 (1992-1999) Fri, May-19-2017, 12:49:29 AM
Replies: 26
Views: 2,989
Posted By aeronaut
Forum: M3 Track: Racing and DE Tue, May-09-2017, 04:55:23 PM
Replies: 27
Views: 3,402
Posted By aeronaut
Re: Running without front anti roll bar?

I've always wondered about the usefulness of roll bars on a track car. Not meaning they aren't useful, but they are used for a different reason than a street car.

I'm tempted to unhook both ARBs,...
Forum: M3 Track: Racing and DE Mon, May-08-2017, 05:25:18 PM
Replies: 82
Views: 15,078
Posted By aeronaut
Re: Order of operations for DE car upgrades

I had one set of front rotors that no matter what, I just couldn't get bedded right with PFC08s. Changed rotors, and never another issue. Ima try PFC11's next, me thinks.

mrRed, it sounds like...
Forum: E36 M3 (1992-1999) Sun, Apr-23-2017, 12:56:25 PM
Replies: 2
Views: 375
Posted By aeronaut
Re: e36 M3 BBK helppp!!!!

Which stock wheels? My stock Contours would NOT fit over 996 calipers with 12mm spacers. Needed another ~2mm .
Forum: M3 Track: Racing and DE Sat, Apr-22-2017, 08:16:47 PM
Replies: 71
Views: 5,249
Posted By aeronaut
Re: If you could only give one piece of advice to a beginner on the track...

I don't think there's a wrong answer here. My opinion is that with cars so capable and fast, a novice can get in trouble much more quickly than an instructor can intervene. I depend on the DSC to...
Forum: M3 Track: Racing and DE Sat, Apr-22-2017, 08:12:47 PM
Replies: 71
Views: 5,249
Posted By aeronaut
Re: If you could only give one piece of advice to a beginner on the track...

Heel/toe is a pretty advanced technique, and not necessary for novice. Of course, practicing is never a bad thing.
Forum: M3 Track: Racing and DE Fri, Apr-21-2017, 01:54:35 PM
Replies: 71
Views: 5,249
Posted By aeronaut
Re: If you could only give one piece of advice to a beginner on the track...

There's of course trade-offs for every decision. As an instructor, my default for a new student is always DSC fully ON. Then adjust from there, maybe.

I'm a big fan of #11. I tell my students...
Forum: M3 Track: Racing and DE Thu, Apr-20-2017, 01:43:12 PM
Replies: 71
Views: 5,249
Posted By aeronaut
Re: If you could only give one piece of advice to a beginner on the track...

Ha. True enough.

Back to topic; no, seriously, forget everything in this thread EXCEPT that one thing that trumps all things, listen to your instructor.
Forum: M3 Track: Racing and DE Thu, Apr-20-2017, 10:01:39 AM
Replies: 71
Views: 5,249
Posted By aeronaut
Re: If you could only give one piece of advice to a beginner on the track...

Figure out your racing budget, and multiply by 4.

Wait, I'm assuming you'll be doing HPDE for a while first.
So for HPDE, listen to your instructors.
Forum: M3 Track: Racing and DE Fri, Apr-14-2017, 12:41:30 PM
Replies: 0
Views: 407
Posted By aeronaut
Major thumbs up to AiM Sports support

I sent AiM an email a few weeks ago about how to get date/time info for a specific session (it's currently not available in Race Analysis 2).
Fast forward a few weeks and a handful of emails, and...
Forum: M3 Track: Racing and DE Sat, Apr-08-2017, 03:05:43 PM
Replies: 52
Views: 3,229
Posted By aeronaut
Re: Is the AIM Solo DL + Smarty Cam a good choice for HPDE data log and video?

Agreed. I rarely do overlay anymore. Maybe a fast lap now and then to share with a few friends to brag. But honestly, even then I tend to just edit down to the fast lap, and send an email that says...
Forum: M3 Track: Racing and DE Sat, Apr-08-2017, 12:20:00 AM
Replies: 14
Views: 2,430
Posted By aeronaut
Re: First track day in the M3

I'm at Summit instructing most weekends when many of the orgs are running a DE (BSR/FATT, SCCA, TrackDaze, and/or Chen etc.).

Happy to tell you what I know about any of the 3 tracks. Look around...
Forum: M3 Track: Racing and DE Thu, Apr-06-2017, 02:43:31 PM
Replies: 14
Views: 2,430
Posted By aeronaut
Re: First track day in the M3

Really depends on the tire you're running. Sticky tires with soft sidewalls like tons of camber, and you can eat an outer edge away in one session. But this doesn't sound like you're current setup....
Forum: M3 Track: Racing and DE Tue, Apr-04-2017, 05:17:47 PM
Replies: 52
Views: 3,229
Posted By aeronaut
Re: Is the AIM Solo DL + Smarty Cam a good choice for HPDE data log and video?

I just had so many issues with Harry's (probably my phone), I bought an AiM Solo and a Garmin Virb Ultra. And now, I'm still trying to get a good workflow with the various analysis and editing tools!...
Forum: M3 Track: Racing and DE Tue, Apr-04-2017, 05:09:02 PM
Replies: 14
Views: 2,430
Posted By aeronaut
Re: First track day in the M3

Nice consistent times. It's always fun playing with the Pcars. If you were on Main this last weekend, I was over on Shenandoah instructing for SCCA, I usually make it over to Main during lunch to...
Forum: M3 Track: Racing and DE Wed, Mar-29-2017, 06:25:33 PM
Replies: 21
Views: 1,531
Posted By aeronaut
Re: Quick brake fluid question

That's what one calls a sealed system. The internets would make you believe that isn't possible.
Forum: M3 Track: Racing and DE Mon, Mar-27-2017, 04:24:53 PM
Replies: 21
Views: 1,531
Posted By aeronaut
Re: Quick brake fluid question

Does mean those gauges are useless, or that your customers change their fluid regularly? :)
Forum: M3 Track: Racing and DE Sun, Mar-26-2017, 11:06:55 AM
Replies: 19
Views: 1,053
Posted By aeronaut
Re: Polyurethane Outer RCA Bushings?

^This. And if you find yourself replacing them often due to RACE CAR, get the BMW tool. It's expensive, but you can replace that lower ball joint in about 10 minutes, without removing anything from...
Forum: M3 Track: Racing and DE Sat, Mar-25-2017, 04:07:17 PM
Replies: 19
Views: 1,053
Posted By aeronaut
Re: Polyurethane Outer RCA Bushings?

On the 95 M3, the lower outer is a rubber bushing.
Forum: M3 Track: Racing and DE Thu, Mar-23-2017, 02:07:08 AM
Replies: 92
Views: 12,316
Posted By aeronaut
Re: What brake fluid are you using

I tried the Torque stuff, and it was fine. Went a full season without a full flush. But am trying to back off on cost a bit, so am trying the Wilwood EXP 600 plus. 2 days, and all is well so far.
...
Forum: M3 Track: Racing and DE Tue, Mar-21-2017, 02:34:42 PM
Replies: 43
Views: 3,355
Posted By aeronaut
Re: Harness bar question

Are those OEM seats? Anyway, as they say, the most important safety equipment is the driver, and in this case, the instructor. If you look at 20 seconds in at what the student does, (at least I hope)...
Forum: M3 Track: Racing and DE Tue, Mar-21-2017, 02:04:49 PM
Replies: 43
Views: 3,355
Posted By aeronaut
Re: Harness bar question

"Such deceleration will partially eject the occupant from a 3-point factory belt"

OUCH!!!! That'll leave a mess.
Forum: M3 Track: Racing and DE Tue, Mar-21-2017, 01:52:36 PM
Replies: 43
Views: 3,355
Posted By aeronaut
Re: Harness bar question

We can find crash examples to support any safety statement we want to make. That doesn't mean it's 'right'. And let's be serious, 'right' is spending x amount of money and giving up 'y' amount of...
Forum: M3 Track: Racing and DE Tue, Mar-21-2017, 01:43:00 PM
Replies: 43
Views: 3,355
Posted By aeronaut
Re: Harness bar question

^Makes sense. Well, the comment on where you're more likely to die...not the comment on speed-towing. lol.

There's a lot of recommendations made in forums on safety, without actual data to support...
Forum: M3 Track: Racing and DE Tue, Mar-21-2017, 01:27:25 PM
Replies: 43
Views: 3,355
Posted By aeronaut
Re: Harness bar question

Personally, I struggle with a blanket recommendation of a one size fits all bolt-in roll bar for a car driven on the street (no helmet, likely not wearing all the 5/6 belts, adjust-ability of seat...
Forum: M3 Track: Racing and DE Sun, Mar-19-2017, 11:39:35 PM
Replies: 16
Views: 1,534
Posted By aeronaut
Re: one day sale at home depot on 1/2 Milwaukee impact wrench

Certainly sounds marginal, if not defective. The wrench, not you. :)
Forum: M3 Track: Racing and DE Sun, Mar-19-2017, 11:28:07 AM
Replies: 16
Views: 1,534
Posted By aeronaut
Re: one day sale at home depot on 1/2 Milwaukee impact wrench

Wow, I think that's the Milwaukee 2655B is the same compact I have. It works fine with lug nuts, and many other things. On the 3 setting, it doesn't struggle at all on nuts torqued to 90NM, and...
Forum: M3 Track: Racing and DE Mon, Mar-13-2017, 06:27:18 PM
Replies: 43
Views: 3,355
Posted By aeronaut
Re: Harness bar question

What's your setup? OEM seat?
Lot's of opinions on what to do, and not to do. Research is your friend. But with OEM seats, and no roll/cage, I'd recommend Schroth 4 points.
Forum: E36 M3 (1992-1999) Fri, Mar-10-2017, 06:03:27 PM
Replies: 9
Views: 576
Posted By aeronaut
Re: WD40 Killed Idler Pulley

Bring it!

http://i.imgur.com/Voa9TWW.png


http://i.imgur.com/eQ2yIDf.png
Forum: M3 Track: Racing and DE Fri, Mar-10-2017, 12:39:48 AM
Replies: 13
Views: 1,998
Posted By aeronaut
Re: Cayman S Brakes for Track

http://www.massivebrakes.com/
Active on these forums, username Massive Lee, extremely knowledgeable about brakes
He has more options than listed on his website.
Before committing to the...
Forum: M3 Track: Racing and DE Thu, Mar-09-2017, 11:23:37 PM
Replies: 13
Views: 1,998
Posted By aeronaut
Re: Cayman S Brakes for Track

I believe everything you need from Rallyroad; https://www.rallyroad.net/collections/e46brakes, except calipers and pads. Get used calipers from ebay, or a Porsche forum, or rebuilt from rockauto...
Forum: M3 Track: Racing and DE Wed, Mar-08-2017, 11:39:06 AM
Replies: 7
Views: 537
Posted By aeronaut
Re: Stoptec BBK rear caliper options

Just curious, why do you prefer the RS29 yellow over PFC, and which PFC?
Forum: M3 Track: Racing and DE Tue, Mar-07-2017, 01:49:09 PM
Replies: 21
Views: 1,983
Posted By aeronaut
Re: Stock Rotors - Centric Blanks or Stoptech Slotted?

This is my experience also ($55 Centric high carbon rotors w/PFC08s). E36 M3 with Brembo front calipers and E46M3 front rotors. No cooling ducts. A friend of mine (135i) ran 1/2 season with one...
Forum: E36 M3 (1992-1999) Fri, Mar-03-2017, 03:50:03 AM
Replies: 38
Views: 1,742
Posted By aeronaut
Re: Front strut bar?

I was really talking about total cost of ownership for turning a car into a solid track car and tracking it a few dozen times a year. Even amortizing that over 5 years, yea, it's a few grand a year....
Forum: E36 M3 (1992-1999) Thu, Mar-02-2017, 01:27:27 PM
Replies: 38
Views: 1,742
Posted By aeronaut
Re: Front strut bar?

^ That's the one I had in mind.

The recommendation to preserve the shock towers is certainly valid. Add that the E36 chassis isn't as stiff as the E46 chassis and is older, and that the upkeep of...
Showing results 1 to 100 of 1541

 
Forum Jump


All times are GMT. The time now is 05:20:21 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
M3Forum.com and M3forum.net is in no way sponsored, endorsed or affiliated by or with BMW NA / BMW AG or any of it's subsidiaries or vendors.
BMW and M3 (E90 M3 | E92 M3 | E93 M3 | E46 M3 | E36 M3 | E30 M3) are registered trademarks of BMW AG.
M3Forum Terms of Service
Copyright 1999-2017 M3Forum.com
BMW M3 owners and enthusiasts with BMW M3 Forums, M3 Photos, M3 Reviews, and more! Get the latest BMW M3 discussions and news.