BMW M3 Forum
BMW M3 Forum BMW M3 Gallery BMW M3 Reviews BMW M3 Social Groups BMW M3 Chat M3Forum Sponsors >>
Loading


Mobile M3forum
Go Back   BMW M3 Forum.com (E30 M3 | E36 M3 | E46 M3 | E92 M3 | F80/X) > Search Forums
Tire Rack Buy Winter Tires Now!
Not a member? Register Now!
Register Gallery All Albums Garage Search Today's Posts Mark Forums Read Calendar FAQ


Showing results 1 to 100 of 919
Search took 0.07 seconds.
Search: Posts Made By: NolliM3
Forum: E36 M3 (1992-1999) Wed, Nov-14-2018, 12:17:41 AM
Replies: 10
Views: 209
Posted By NolliM3
Re: Squeaky belt/pulley/tensioner - help diagnose

I would place my money on the idler pulley...encircled in green. A better-diagnosis would be to use a mechanic stethoscope.
Forum: E36 M3 (1992-1999) Wed, Nov-14-2018, 12:04:07 AM
Replies: 60
Views: 2,631
Posted By NolliM3
Re: What to Select (INPA) for the U.S. M3?

Yes; however, I had to get a laptop (Dell) with the nine pin serial and the tiny ADS for my OBD! car. I use mostly DIS for my car though. Windows 7 would have been a better option.
Forum: E36 M3 (1992-1999) Thu, Nov-08-2018, 03:41:04 PM
Replies: 11
Views: 269
Posted By NolliM3
Re: Intro and hello

Looks interesting so far from the pictures you shared despite the small images...be aware that the possible body painting can cost north of $5,000.
Forum: E36 M3 (1992-1999) Thu, Nov-08-2018, 03:23:06 PM
Replies: 9
Views: 274
Posted By NolliM3
Re: Rear seat upper rubber trim help

It appears you answered your question with your explanation.
Forum: E36 M3 (1992-1999) Thu, Nov-08-2018, 03:19:43 PM
Replies: 15
Views: 470
Posted By NolliM3
Re: A Barn Find? Almost

Here, I would make an agreement with the seller to split the cost to have a flat-bed carrier take it to that shop...(about $80 plus millage).
Forum: E36 M3 (1992-1999) Thu, Nov-08-2018, 03:04:46 PM
Replies: 15
Views: 470
Posted By NolliM3
Re: A Barn Find? Almost

Get a pre-purchase inspection from a reputable mechanic familiar with BMW vehicles as ultimately you'll be the decision maker!
Forum: E36 M3 (1992-1999) Thu, Nov-08-2018, 02:58:03 PM
Replies: 11
Views: 269
Posted By NolliM3
Re: Intro and hello

Welcome; however, with no pics, most will think it didn't happen!
Forum: E36 M3 (1992-1999) Sun, Nov-04-2018, 12:49:48 PM
Replies: 4
Views: 195
Posted By NolliM3
Re: Please help diagnose my electrical issue

My first thought is your wire harness hack...what I would do, if in your situation, it to go back to the OE valve cover...your oil leak is that you lack proper installation...there are spots that...
Forum: E36 M3 (1992-1999) Sat, Nov-03-2018, 06:51:25 PM
Replies: 32
Views: 1,131
Posted By NolliM3
Re: Mounting Recaro Sports

Dude, Brett made a kind suggestion...all you had to say was a thank you and that you were already committed to what you got. Instead, your ego was bruised as you stated...if you do things with the...
Forum: E36 M3 (1992-1999) Thu, Nov-01-2018, 08:43:11 PM
Replies: 5
Views: 228
Posted By NolliM3
Re: 04 M3 - Front Passenger Squeak **VIDEO**

No; however, you said, "gets pretty annoying if just cruising around town" That's all the diagnoses you need to change the wheel bearing.
Forum: E36 M3 (1992-1999) Thu, Nov-01-2018, 08:26:51 PM
Replies: 32
Views: 1,131
Posted By NolliM3
Re: Mounting Recaro Sports

Bummer...thanks for sharing!
Forum: E36 M3 (1992-1999) Thu, Nov-01-2018, 08:07:49 PM
Replies: 5
Views: 228
Posted By NolliM3
Re: 04 M3 - Front Passenger Squeak **VIDEO**

Sounds as if your wheel bearing shot however, to get more help, you should post here: http://www.m3forum.net/m3forum/forumdisplay.php?f=9
Forum: E36 M3 (1992-1999) Wed, Oct-31-2018, 04:21:44 PM
Replies: 16
Views: 633
Posted By NolliM3
Re: Regluing Door Card Inserts

Goop Marine is another option...handles high temperature very well.
Forum: E36 M3 (1992-1999) Wed, Oct-31-2018, 04:13:01 PM
Replies: 5
Views: 277
Posted By NolliM3
Re: Help, clutch slave cylinder replacement. It broke.

The problem is trying to fish it out is that the clutch fork lever is in the way if the slave cylinder piston fell to the bottom of the bell housing...I had the soft tip of the slave cylinder piston...
Forum: E36 M3 (1992-1999) Mon, Oct-29-2018, 03:43:53 AM
Replies: 32
Views: 1,131
Posted By NolliM3
Re: Mounting Recaro Sports

When you say "short,' how short? I am 5'4'.
Forum: E36 M3 (1992-1999) Sun, Oct-28-2018, 07:34:00 PM
Replies: 32
Views: 1,131
Posted By NolliM3
Re: Mounting Recaro Sports

Thank you for your recommendation, Brett...it's noted and added to watch list....
Forum: E36 M3 (1992-1999) Sun, Oct-28-2018, 07:13:10 PM
Replies: 5
Views: 337
Posted By NolliM3
Re: Presentation and a question

You might need #65712266773 however, when I plug that PN into search on ECS and FCP Euro, returns this: 65712228748...
Forum: E36 M3 (1992-1999) Thu, Oct-25-2018, 06:56:59 AM
Replies: 18
Views: 1,097
Posted By NolliM3
Re: Black Tar Looking Adhesive

Thank you Brent S, for responding...yes, I have learned the hard way, except it was a used motor instead of new. That was what I had expected after buying the used motor and discovering that nothing...
Forum: E36 M3 (1992-1999) Wed, Oct-24-2018, 02:27:46 AM
Replies: 8
Views: 519
Posted By NolliM3
Re: Curious...How Many Do Own Alignment?

Reauxtide, I now believe you're correct that 0.05 equals 1/32"...I have been shopping for a steel ruler 18 or 24inches with 1/32 per inch...I want to give self-aligning a chance,...waiting for the...
Forum: E36 M3 (1992-1999) Tue, Oct-23-2018, 05:40:54 PM
Replies: 8
Views: 519
Posted By NolliM3
Re: Curious...How Many Do Own Alignment?

Yes, I am learning that the string method of alignment applies to our cars very well.



Thank Reauxtide for responding...so you measure your toe in with 1/32 of an inches...so, it it easy to...
Forum: E36 M3 (1992-1999) Tue, Oct-23-2018, 05:24:49 PM
Replies: 8
Views: 519
Posted By NolliM3
Re: Curious...How Many Do Own Alignment?

Thank you Eric M3 for responding and sharing...I had been familiar with the Trackace that another member shared...cost-wise, tools seem to favor those who track their car frequently.
Forum: E36 M3 (1992-1999) Fri, Oct-19-2018, 08:26:20 AM
Replies: 8
Views: 519
Posted By NolliM3
Curious...How Many Do Own Alignment?

As the title says, I am curious how many enthusiasts do their own alignment? I remember one member saying he does his and had posted a laser tool for toe in/out...can't remember his user name. Would...
Forum: E36 / E30 - Parts for Sale/Wanted Thu, Oct-18-2018, 01:36:20 AM
Replies: 1
Views: 282
Posted By NolliM3
Re: Clutch and/or flywheel for E36 M3

I have a new Sachs sprung clutch disc which one can only use with a single mass flywheel for sale $110 shipped.
Forum: E36 M3 (1992-1999) Sun, Oct-14-2018, 07:45:03 PM
Replies: 201
Views: 30,962
Posted By NolliM3
Re: 1998 Alpine White Sedan Build Thread

This just intimidate the hell out of me to bunch them up like this...I know you have done this repeatedly and probably known the nuts and bolt by heart...would love to learn your methodology in sort...
Forum: E36 M3 (1992-1999) Fri, Oct-12-2018, 02:40:36 AM
Replies: 18
Views: 1,097
Posted By NolliM3
Re: Black Tar Looking Adhesive

Thank you M_Parallel...I would never have thought that...I'll put some loctite on when I put it back together because that's where I believe I have an annoying rattle...
Forum: E36 M3 (1992-1999) Thu, Oct-11-2018, 10:41:31 PM
Replies: 18
Views: 1,097
Posted By NolliM3
Re: Black Tar Looking Adhesive

Thank you Brett for recommending the tarminator...it really clean it up very well and I haven't even wipe it with the alcohol yet. Also, how do one remove that clip/lock in the green circle? I need...
Forum: E36 M3 (1992-1999) Thu, Oct-11-2018, 04:06:21 AM
Replies: 136
Views: 8,496
Posted By NolliM3
Re: M3 S50B30 in Japan

It looks clean...jealous of your rain seat...congrats!
Forum: E36 M3 (1992-1999) Thu, Oct-11-2018, 03:58:08 AM
Replies: 18
Views: 1,097
Posted By NolliM3
Re: Black Tar Looking Adhesive

Well, I went to Home Depot and they had the Butyl tape for $5.90 including tax for 50yds...they only had the gray one...I bought it.
Forum: E36 M3 (1992-1999) Wed, Oct-10-2018, 09:33:19 PM
Replies: 18
Views: 1,097
Posted By NolliM3
Re: Black Tar Looking Adhesive

Just to update the thread, O'reily claimed they don't sell the butyl tape anymore and that I should check Home Depot for the 3M Strip Calk.
Forum: E36 M3 (1992-1999) Wed, Oct-03-2018, 01:48:03 AM
Replies: 18
Views: 1,097
Posted By NolliM3
Re: Black Tar Looking Adhesive

It's not caulk...it just uses the tube like caulk does and is black. I'll get the butyl tape.
Forum: E36 M3 (1992-1999) Tue, Oct-02-2018, 02:31:42 AM
Replies: 18
Views: 1,097
Posted By NolliM3
Re: Black Tar Looking Adhesive

Thanks Brett for responding and sharing...what I was thinking of from 3M came in a tube like caulk...I'll try the Butyl tape since it appears cheaper as well as the tarminator.
Forum: E36 M3 (1992-1999) Sun, Sep-30-2018, 07:37:42 PM
Replies: 18
Views: 1,097
Posted By NolliM3
Black Tar Looking Adhesive

Does anyone knows the name of the black tar looking adhesive on the window vapor barrier? I know 3M makes it and is sold for about $32, but I can't remember the name.
Forum: E36 M3 (1992-1999) Sat, Sep-29-2018, 02:49:55 PM
Replies: 70
Views: 4,414
Posted By NolliM3
Re: E36 M3 4-Door: Contracheatcode Build Journal

My 95M3 had one also; however, I bought and placed a second ground strap up front.
Forum: E36 M3 (1992-1999) Fri, Sep-28-2018, 03:59:26 AM
Replies: 13
Views: 1,138
Posted By NolliM3
Re: Making the cup holder large enough for modern phones

I am thinking of deleting the cupholder tray...its sitting on my dining table and was a source for rattle...wanted to know what you guys do with the light...it would be pleasant to put in a BMW logo...
Forum: E36 M3 (1992-1999) Tue, Sep-25-2018, 06:25:48 PM
Replies: 2
Views: 399
Posted By NolliM3
Re: Help Me Fix My AC Woes

Thank you Eric M3 for responding and clarifying what the SG meant...it had been baffling me. Yes, I checked the connection and it's solid...that's why I concluded it most be the control panel. I had...
Forum: E36 M3 (1992-1999) Tue, Sep-25-2018, 05:11:24 AM
Replies: 2
Views: 399
Posted By NolliM3
Help Me Fix My AC Woes

My AC has been blowing hot air mixed with the cold air...during the summer it becomes pointless to run the AC. There is no problem during the winter getting heat. I have diagnosed my AC with DIS and...
Forum: E36 M3 (1992-1999) Tue, Sep-25-2018, 02:24:15 AM
Replies: 11
Views: 2,340
Posted By NolliM3
Re: Leaking Clutch Fluid under transmission

You'll need an extension on that 13mm socket...I think I used a 9" extension...you'll need to feel the nut...since your car is not as tight as the M3, good luck!
Forum: E36 M3 (1992-1999) Sat, Sep-22-2018, 09:17:38 PM
Replies: 25
Views: 1,669
Posted By NolliM3
Re: Gauging interest in a trans tunnel insulation sag fix

Since I had my transmission out, I followed Phil's suggestion. Mine was torn and leaking the fiber so the design wouldn't have helped.
...
Forum: E36 M3 (1992-1999) Mon, Sep-17-2018, 03:54:23 PM
Replies: 4
Views: 427
Posted By NolliM3
Re: Removing Aftermarket Shifter

It is actually a Chinese knock-off...it's really well-made...just could get into and stay in reverse. It's avail if you want to put back the c-clip in...just PM your address and I'll ship it to you...
Forum: E36 M3 (1992-1999) Sun, Sep-16-2018, 09:16:04 PM
Replies: 4
Views: 427
Posted By NolliM3
Re: Removing Aftermarket Shifter

Had to use a pry bar with jack support to push it up and out!
Forum: E36 M3 (1992-1999) Sun, Sep-16-2018, 05:50:47 PM
Replies: 4
Views: 427
Posted By NolliM3
Removing Aftermarket Shifter

Has anyone had to remove an aftermarket shifter as pictured below...how did you removed it? This one has two o-ring holding the cup in...I removed the c-clip both from the bottom and the top with no...
Forum: E36 M3 (1992-1999) Tue, Sep-11-2018, 07:36:51 PM
Replies: 4
Views: 377
Posted By NolliM3
Re: Popping out of 2nd and 4th, need help

Thanks for your help also...you gave me the idea to check whether the rubber boot could be preventing mine from staying in reverse.
Forum: E36 M3 (1992-1999) Tue, Sep-11-2018, 03:15:02 AM
Replies: 4
Views: 377
Posted By NolliM3
Re: Popping out of 2nd and 4th, need help

Something in the shift linkage is not right...take pic and show us! Come to think of it your shifter stick may be facing wrong direction when installed.
Forum: E36 M3 (1992-1999) Mon, Sep-10-2018, 02:40:01 AM
Replies: 4
Views: 403
Posted By NolliM3
Re: Popping Out of Reverse

Also found this thread that suggested a 10degree bend: http://www.m3forum.net/m3forum/showthread.php?t=310166
Forum: E36 M3 (1992-1999) Mon, Sep-10-2018, 01:13:12 AM
Replies: 4
Views: 403
Posted By NolliM3
Re: Popping Out of Reverse

Thank you both for responding...more research reveals that I might be able to modify what I got which is a knock-off of the Dinan short shifter not UUC as earlier thought. It might have also copied...
Forum: E36 M3 (1992-1999) Sat, Sep-08-2018, 07:19:59 PM
Replies: 4
Views: 403
Posted By NolliM3
Popping Out of Reverse

After research, it seems that I am another victim of eBay short throw despite it looking like a beautiful Chinese knock-off UUC's short shifter...I have AKG's DSSR and whenever I release the clutch...
Forum: E36 M3 (1992-1999) Sat, Sep-08-2018, 07:09:42 AM
Replies: 10
Views: 733
Posted By NolliM3
Re: Clutch hydraulics, difficult to put into gear, keep bleeding or replace?

If he had a stiff clutch pedal and then soft, shouldn't that indicates a leak? If that's the case, fluid should be coming out the transmission weep hole or out where the master connects to the hard...
Forum: E36 M3 (1992-1999) Wed, Sep-05-2018, 10:56:07 PM
Replies: 43
Views: 3,173
Posted By NolliM3
Re: ...headliner question

All I can say is I am glad the PO had a professional do mine.
Forum: E36 M3 (1992-1999) Tue, Sep-04-2018, 01:25:12 AM
Replies: 5
Views: 409
Posted By NolliM3
Re: 1st start idle

If it get smooth by 30sec, why worry about it!
Forum: E36 M3 (1992-1999) Tue, Sep-04-2018, 01:16:04 AM
Replies: 6
Views: 385
Posted By NolliM3
Re: A/C condenser relay issue? Turns on with a wire jumping terminals but not with re

https://www.realoem.com/bmw/enUS/showparts?id=BF93-USA-10-1995-E36-BMW-M3&diagId=61_4359
Forum: E36 M3 (1992-1999) Sun, Aug-26-2018, 07:05:47 PM
Replies: 8
Views: 642
Posted By NolliM3
Re: Slave Cylinder Plunger Cap

I am learning how fragile the slave cylinder can be...glad I not the only one to have had issues.
Forum: E36 M3 (1992-1999) Sun, Aug-26-2018, 07:01:57 PM
Replies: 8
Views: 642
Posted By NolliM3
Re: Slave Cylinder Plunger Cap

Brilliant idea on the duct tape/coat hanger Phil...I tried about a six inches tweezers but was worried that would get in there. Although I can see with the borescope camera, it still difficult to...
Forum: E36 M3 (1992-1999) Sun, Aug-26-2018, 12:35:17 AM
Replies: 8
Views: 642
Posted By NolliM3
Re: Slave Cylinder Plunger Cap

Here's a picture taken with my borescope camera...it was a Febi slave cylinder.

https://farm2.staticflickr.com/1866/44218141512_05dfb74622_o.jpg (https://flic.kr/p/2anpwWd)
Forum: E36 M3 (1992-1999) Fri, Aug-24-2018, 08:38:30 PM
Replies: 5
Views: 373
Posted By NolliM3
Re: Convertible Top Swap

This forum is for BMW M3.
Forum: E36 M3 (1992-1999) Fri, Aug-24-2018, 07:52:57 PM
Replies: 22
Views: 1,321
Posted By NolliM3
Re: Plan to convert an E36 3 series to an M3

Do not discount your ability to do most of the work yourself...you'll gain so much confidence and surprised yourself. Also, don't discount moving up to the E46 M3...the prices are very good. Also,...
Forum: E36 M3 (1992-1999) Sat, Aug-18-2018, 07:06:25 PM
Replies: 30
Views: 1,974
Posted By NolliM3
Re: What if Singer did e36 M3s?

This could/would be considered reimagined with a turbo. I would never spend $500,000 to reimagine an e36 M3 when I could buy several other cars.
Forum: E36 M3 (1992-1999) Mon, Aug-13-2018, 07:12:29 PM
Replies: 20
Views: 1,631
Posted By NolliM3
Re: My E36 repair is complete!

Nice...don't get carried away with the celebration...remember you got more work to do!
Forum: E36 M3 (1992-1999) Sun, Aug-12-2018, 07:19:38 PM
Replies: 8
Views: 642
Posted By NolliM3
Re: Slave Cylinder Plunger Cap

Thank you Brett for responding...I threw away the old one and not sure where to find another tip...might be easier to just buy another slave cylinder. The next one I'll put some red loctite on that...
Forum: E36 M3 (1992-1999) Sun, Aug-12-2018, 04:21:49 PM
Replies: 8
Views: 642
Posted By NolliM3
Re: Slave Cylinder Plunger Cap

Here is a picture of what I am speaking of...I am thinking of placing one or two of those bleeder caps on as a substitute...doesn't make sense to drop the transmission for that...can't believe it's...
Forum: E36 M3 (1992-1999) Sun, Aug-12-2018, 02:42:41 AM
Replies: 8
Views: 642
Posted By NolliM3
Slave Cylinder Plunger Cap

I was bleeding the clutch by removing the slave cylinder and squeezing the plunger (really needs large hands)...not sure what happened; however, the cap fell off in the transmission. I tried to feel...
Forum: E36 M3 (1992-1999) Sun, Aug-05-2018, 04:01:56 PM
Replies: 6
ABS
Views: 516
Posted By NolliM3
Re: ABS

That's what I thought being on the forum now for a while...still had to double checked. I think that mechanic just didn't want to fool around with a 95M3 when newer cars were lining up for service...
Forum: E36 M3 (1992-1999) Sun, Aug-05-2018, 03:53:34 PM
Replies: 6
ABS
Views: 516
Posted By NolliM3
Re: ABS

I have a used one; however, it's for 96+. I did an analysis with DIS, and it pointed to the front driver side...I cleaned the sensor (had lots of metal shavings) so I hoping that's it.
Forum: E36 M3 (1992-1999) Sat, Aug-04-2018, 07:05:01 PM
Replies: 6
ABS
Views: 516
Posted By NolliM3
ABS

When I had bought my car, the PO said the ABS light had been on and the BMW master mechanic they took the car to, could not find the problem. The PO gave me the relays saying that installing them...
Forum: E36 M3 (1992-1999) Wed, Aug-01-2018, 10:54:02 PM
Replies: 11
Views: 910
Posted By NolliM3
Re: A list of fasteners for the front clip.

https://www.realoem.com/bmw/enUS/showparts?id=BF93-USA-10-1995-E36-BMW-M3&diagId=51_2758

Note: this is for a 95M3 just to give you an idea...you still need to look up your car as others had...
Forum: E36 M3 (1992-1999) Tue, Jul-31-2018, 05:08:57 PM
Replies: 30
Views: 2,330
Posted By NolliM3
Re: Now this is crazy....90.5K

As they say, money just burns a hole in some people's pocket. :laughhard:
Forum: Photography Tue, Jul-31-2018, 03:26:08 AM
Replies: 528
Views: 49,070
Posted By NolliM3
Re: Snapshot Of The Day (1 post per day/no cell phone images)

The follow up!

https://farm2.staticflickr.com/1839/42848423415_f2cc5200ba_b.jpg (https://flic.kr/p/28hnnsX)
Forum: E36 M3 (1992-1999) Sun, Jul-29-2018, 03:23:51 PM
Replies: 5
Views: 474
Posted By NolliM3
Re: BMW software on CL

I agree...ISTA-D and ISTA-P plus Icom A+B+C, and you'll be in BMW heaven. DIS is cool for our cars; however, one has to be technology-savvy to set up. I have DIS, INPA, and ISTA-D as well as...
Forum: Photography Sat, Jul-28-2018, 03:38:41 AM
Replies: 528
Views: 49,070
Posted By NolliM3
Re: Snapshot Of The Day (1 post per day/no cell phone images)

Just discovered this section of the forum so, I'll play.

https://farm1.staticflickr.com/936/42780146915_adfe434d3f_h.jpg (https://flic.kr/p/28bkreV)
Forum: E36 M3 (1992-1999) Thu, Jul-26-2018, 03:25:39 AM
Replies: 23
Views: 2,205
Posted By NolliM3
Re: ZHP knob vs. BMW Performance knob

That's the weighted one I have also...didn't care for the aluminum on the ZHP...thought I was the only one and kept quiet about it since most members seem to favor the ZHP.
Forum: Member Journals Wed, Jul-25-2018, 01:30:56 AM
Replies: 72
Views: 8,225
Posted By NolliM3
Forum: E36 M3 (1992-1999) Mon, Jul-23-2018, 03:07:17 AM
Replies: 36
Views: 6,737
Posted By NolliM3
Re: How-to Mount OEM GT Front Splitter to Motion Motorsports Panel

Until he reply, I think the rivnut tool was for the m12...you need the step drill bit...look for the ones in mm...I got one coming from China via eBay (4mm - 22mm) as well as the 6mm nutsert and...
Forum: E36 M3 (1992-1999) Mon, Jul-23-2018, 02:48:29 AM
Replies: 9
Views: 554
Posted By NolliM3
Re: drivers side window doesn't work (1995)

If you think it's your wiring, get your multi-tester and start checking for continuity. Here's a video that shed light on the bushing and how it works in the regulator.

BMW E36 Window Regulator...
Forum: E36 M3 (1992-1999) Sun, Jul-22-2018, 10:27:51 PM
Replies: 36
Views: 3,078
Posted By NolliM3
Re: Vandalized in parking garage

I agree...set up a Gopro or equivalent action camera in your car...I got one on my back seat dash, and I can connect to either battery pack or solar battery recording every four hours looping (32GB...
Forum: E36 M3 (1992-1999) Sun, Jul-22-2018, 10:07:46 PM
Replies: 10
Views: 1,397
Posted By NolliM3
Re: -Bad Fan clutch

So, are you saying whether a hose clam wasn't tightened properly and caused a leak that you would buy a water pump because of water pump failure?
Forum: E36 M3 (1992-1999) Sun, Jul-22-2018, 09:57:51 PM
Replies: 9
Views: 554
Posted By NolliM3
Re: drivers side window doesn't work (1995)

So, if the motor turns to move the window up and down, as well as, the bushing sits over the end of the motor and into the window support bracket that helps the window to go up and down, you should...
Forum: E36 M3 (1992-1999) Sun, Jul-22-2018, 09:25:39 PM
Replies: 311
Views: 45,281
Posted By NolliM3
Re: My 99' Hellrot intro

The badge sits in a grommet that secures it...I even buggered my paint slightly when I changed mine...get the grommet (51141807495).
Forum: Member Notes and Requests to Admin/Mods Sun, Jul-22-2018, 09:15:07 PM
Replies: 6
Views: 506
Posted By NolliM3
Re: M3forum Website

I sent a message to Sirius through his user name as he doesn't accept a private message via the forum...however, there should be a method for other administrator to contact him on matters regarding...
Forum: E36 / E30 - Parts for Sale/Wanted Sat, Jul-21-2018, 06:54:57 PM
Replies: 8
Views: 777
Posted By NolliM3
Re: E36 Trunk Latch Reinforcement Plates - Coupe, Sedan, Convertible

This is awesome Brett...expect my order soon!
Forum: E36 M3 (1992-1999) Fri, Jul-20-2018, 07:14:02 AM
Replies: 34
Views: 2,171
Posted By NolliM3
Re: E36 A bad deal??

I could have sworn I saw them on mine; however, I just check RealOEM and that's correct...there's none.
Forum: E36 M3 (1992-1999) Fri, Jul-20-2018, 06:29:39 AM
Replies: 34
Views: 2,171
Posted By NolliM3
Re: E36 A bad deal??

The left rear wheel missing the bearing dust cover...take care with attention to details as you're very close to the price point you seek...good luck on your sale!
Forum: E36 M3 (1992-1999) Fri, Jul-20-2018, 06:08:39 AM
Replies: 9
Views: 554
Posted By NolliM3
Re: drivers side window doesn't work (1995)

You should understand that the motor is the entire unit (metal and plastic).
Forum: E36 M3 (1992-1999) Thu, Jul-19-2018, 11:10:55 PM
Replies: 9
Views: 554
Posted By NolliM3
Re: drivers side window doesn't work (1995)

I have the same exact issue as you...if you removed your motor, you should have seen the bushing. I have not done mine yet; however, here's a pic with a spare motor and a new bushing (my motor was...
Forum: E36 M3 (1992-1999) Thu, Jul-19-2018, 10:48:24 PM
Replies: 6
Views: 466
Posted By NolliM3
Re: rubber shifter boot

If you always did it from below, all I can say is good luck doing from above! That's why I said to study it.
Forum: E36 M3 (1992-1999) Thu, Jul-19-2018, 02:55:09 PM
Replies: 6
Views: 466
Posted By NolliM3
Re: rubber shifter boot

OP...for clarity, are you speaking of this, correct?:
Forum: E36 M3 (1992-1999) Thu, Jul-19-2018, 02:44:17 AM
Replies: 4
Views: 477
Posted By NolliM3
Re: p0304 on cold start up

You really need to use a BMW diagnostic such as INPA or DIS to be very clear what's happening.
Forum: E36 M3 (1992-1999) Thu, Jul-19-2018, 02:37:33 AM
Replies: 6
Views: 466
Posted By NolliM3
Re: rubber shifter boot

You will need to study this as well as look under the car to find your answer.
Forum: E36 M3 (1992-1999) Thu, Jul-19-2018, 02:29:07 AM
Replies: 9
Views: 554
Posted By NolliM3
Re: drivers side window doesn't work (1995)

It's most likely the bushing...number 5 here: https://www.realoem.com/bmw/enUS/showparts?id=BF93-USA-10-1995-E36-BMW-M3&diagId=51_2055
Forum: Member Notes and Requests to Admin/Mods Wed, Jul-18-2018, 05:05:36 AM
Replies: 6
Views: 506
Posted By NolliM3
Re: M3forum Website

Thank you, John...is there a way for you to message him either by email or through the forum? If you look at the second image of my earlier post which you responded to above, on the right side you'll...
Forum: E36 M3 (1992-1999) Tue, Jul-17-2018, 07:50:59 PM
Replies: 10
Views: 1,561
Posted By NolliM3
Re: My new to me 1997 m3

Welcome to the forum...may I suggest that you can click on each photo in your photostream, then click on the share and select the BBC...select 1024 by 768 copy then paste here as below so other...
Forum: E36 M3 (1992-1999) Tue, Jul-17-2018, 07:31:21 PM
Replies: 10
Views: 788
Posted By NolliM3
Re: Brake switch, ASC sensor, or both?

That's the normal behavior of the brake light switch when it's bad...it seems to last about two years...I can say to the ASC as my car doesn't have it.
Forum: E36 M3 (1992-1999) Tue, Jul-17-2018, 07:26:27 PM
Replies: 11
Views: 815
Posted By NolliM3
Re: Thermostat housing seating issue

My car came with an aluminum one (don't know the brand), and I also used the black RTV going on three years now...I believe that's standard to apply RTV on the aluminum housing.
Forum: Member Notes and Requests to Admin/Mods Sat, Jul-14-2018, 02:58:07 PM
Replies: 6
Views: 506
Posted By NolliM3
Re: M3forum Website

Thank you John T for responding...had hoped for a moderator. I already knew the site is hosted in Florida, and I believe I now know what's going on. The site uses an app (Google) to differentiate...
Forum: Member Notes and Requests to Admin/Mods Wed, Jul-11-2018, 06:14:34 PM
Replies: 6
Views: 506
Posted By NolliM3
Re: M3forum Website

Please...what is it the website trying to load (see pic)?
Forum: E36 / E30 - Parts for Sale/Wanted Tue, Jul-10-2018, 02:13:49 AM
Replies: 4
Views: 1,013
Posted By NolliM3
Re: BNIB JB Racing Lightweight Flywheel and Clutchmasters FX300 Bilstein shocks

I might need the passenger rear caliper(mine has a stuck bleed nipple I am trying to remove)...would you sell just that? Please PM your response...thank you!
Forum: E36 M3 (1992-1999) Tue, Jul-10-2018, 01:40:51 AM
Replies: 4
Views: 468
Posted By NolliM3
Re: Clutch master cylinder bolt snapped

It surely sucks when one snaps a bolt...I just did the clutch master cylinder...found it much easier doing it upside down however, my problem is a stuck bleed nipple in the passenger rear...
Forum: E36 M3 (1992-1999) Sun, Jul-08-2018, 11:00:29 PM
Replies: 15
Views: 1,340
Posted By NolliM3
Re: Chasing down fault codes

How is the hose from the ICV to the elbow? A slight crack in the hose by the tip at the elbow can cause havoc and misleading diagnoses.
Forum: E36 M3 (1992-1999) Fri, Jul-06-2018, 03:30:28 AM
Replies: 12
Views: 949
Posted By NolliM3
Re: Installing Motion Underpanel

Here, you can really see the difference between the stock plastic insert to Motion's which is at the far right. Glad Brett recommended the stock ones.
...
Forum: E36 M3 (1992-1999) Thu, Jul-05-2018, 07:06:48 PM
Replies: 12
Views: 949
Posted By NolliM3
Re: Installing Motion Underpanel

Awesome Brett...my local dealer had them in stock so I placed an order for four at $2 plus change total; however, I'll only have those two bolts as pictured in first post and what Motion supplied...I...
Forum: E36 M3 (1992-1999) Tue, Jul-03-2018, 05:56:22 PM
Replies: 12
Views: 949
Posted By NolliM3
Installing Motion Underpanel

Those that have installed this underpanel...what do you do with this bolt in pic with the green arrow points to below? I am thinking of using and just ream out the hole of the bracket...just for...
Forum: E36 M3 (1992-1999) Tue, Jul-03-2018, 03:52:57 AM
Replies: 4
Views: 318
Posted By NolliM3
Re: To install or not to install a fan controller, that is the question

What were your plans...were you just let them run continually? You could let the DME/ thermoswitch to trigger the relay that comes with the fan.
Showing results 1 to 100 of 919

 
Forum Jump


All times are GMT. The time now is 05:52:27 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
M3Forum.com and M3forum.net is in no way sponsored, endorsed or affiliated by or with BMW NA / BMW AG or any of it's subsidiaries or vendors.
BMW and M3 (E90 M3 | E92 M3 | E93 M3 | E46 M3 | E36 M3 | E30 M3) are registered trademarks of BMW AG.
M3Forum Terms of Service
Copyright 1999-2017 M3Forum.com
BMW M3 owners and enthusiasts with BMW M3 Forums, M3 Photos, M3 Reviews, and more! Get the latest BMW M3 discussions and news.